Author: yongari Date: Thu Jan 13 23:15:09 2011 New Revision: 217385 URL: http://svn.freebsd.org/changeset/base/217385
Log: If driver is not able to allocate RX buffer, do not start driver. While I'm here move RX buffer allocation and descriptor initialization up to not touch hardware registers in case of RX buffer allocation failure. Modified: head/sys/dev/re/if_re.c Modified: head/sys/dev/re/if_re.c ============================================================================== --- head/sys/dev/re/if_re.c Thu Jan 13 23:00:28 2011 (r217384) +++ head/sys/dev/re/if_re.c Thu Jan 13 23:15:09 2011 (r217385) @@ -2622,6 +2622,16 @@ re_init_locked(struct rl_softc *sc) re_reset(sc); /* + * For C+ mode, initialize the RX descriptors and mbufs. + */ + if (re_rx_list_init(sc) != 0) { + device_printf(sc->rl_dev, "no memory for RX buffers\n"); + re_stop(sc); + return; + } + re_tx_list_init(sc); + + /* * Enable C+ RX and TX mode, as well as VLAN stripping and * RX checksum offload. We must configure the C+ register * before all others. @@ -2673,12 +2683,6 @@ re_init_locked(struct rl_softc *sc) CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); /* - * For C+ mode, initialize the RX descriptors and mbufs. - */ - re_rx_list_init(sc); - re_tx_list_init(sc); - - /* * Load the addresses of the RX and TX lists into the chip. */ _______________________________________________ svn-src-head@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-head To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"