Author: manu
Date: Wed Jul 22 19:08:05 2020
New Revision: 363428
URL: https://svnweb.freebsd.org/changeset/base/363428
Log:
mmccam: Add support for 1.2V and 1.8V eMMC
If the card reports that it support 1.2V or 1.8V signaling switch to this
voltage.
Submitted by: kibab
Modified:
head/sys/cam/mmc/mmc_da.c
Modified: head/sys/cam/mmc/mmc_da.c
==============================================================================
--- head/sys/cam/mmc/mmc_da.c Wed Jul 22 19:04:45 2020 (r363427)
+++ head/sys/cam/mmc/mmc_da.c Wed Jul 22 19:08:05 2020 (r363428)
@@ -136,6 +136,9 @@ struct sdda_softc {
/* Generic switch timeout */
uint32_t cmd6_time;
+ uint32_t timings; /* Mask of bus timings supported */
+ uint32_t vccq_120; /* Mask of bus timings at VCCQ of 1.2 V */
+ uint32_t vccq_180; /* Mask of bus timings at VCCQ of 1.8 V */
/* MMC partitions support */
struct sdda_part *part[MMC_PART_MAX];
uint8_t part_curr; /* Partition currently switched to */
@@ -1242,6 +1245,7 @@ sdda_start_init(void *context, union ccb *start_ccb)
uint32_t sec_count;
int err;
int host_f_max;
+ uint8_t card_type;
CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_start_init\n"));
/* periph was held for us when this task was enqueued */
@@ -1370,12 +1374,35 @@ sdda_start_init(void *context, union ccb *start_ccb)
}
if (mmcp->card_features & CARD_FEATURE_MMC &&
mmc_get_spec_vers(periph) >= 4) {
- if (softc->raw_ext_csd[EXT_CSD_CARD_TYPE]
- & EXT_CSD_CARD_TYPE_HS_52)
+ card_type = softc->raw_ext_csd[EXT_CSD_CARD_TYPE];
+ if (card_type & EXT_CSD_CARD_TYPE_HS_52)
softc->card_f_max = MMC_TYPE_HS_52_MAX;
- else if (softc->raw_ext_csd[EXT_CSD_CARD_TYPE]
- & EXT_CSD_CARD_TYPE_HS_26)
+ else if (card_type & EXT_CSD_CARD_TYPE_HS_26)
softc->card_f_max = MMC_TYPE_HS_26_MAX;
+ if ((card_type & EXT_CSD_CARD_TYPE_DDR_52_1_2V) != 0 &&
+ (host_caps & MMC_CAP_SIGNALING_120) != 0) {
+ setbit(&softc->timings, bus_timing_mmc_ddr52);
+ setbit(&softc->vccq_120, bus_timing_mmc_ddr52);
+ CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
("Card supports DDR52 at 1.2V\n"));
+ }
+ if ((card_type & EXT_CSD_CARD_TYPE_DDR_52_1_8V) != 0 &&
+ (host_caps & MMC_CAP_SIGNALING_180) != 0) {
+ setbit(&softc->timings, bus_timing_mmc_ddr52);
+ setbit(&softc->vccq_180, bus_timing_mmc_ddr52);
+ CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
("Card supports DDR52 at 1.8V\n"));
+ }
+ if ((card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) != 0 &&
+ (host_caps & MMC_CAP_SIGNALING_120) != 0) {
+ setbit(&softc->timings, bus_timing_mmc_hs200);
+ setbit(&softc->vccq_120, bus_timing_mmc_hs200);
+ CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
("Card supports HS200 at 1.2V\n"));
+ }
+ if ((card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) != 0 &&
+ (host_caps & MMC_CAP_SIGNALING_180) != 0) {
+ setbit(&softc->timings, bus_timing_mmc_hs200);
+ setbit(&softc->vccq_180, bus_timing_mmc_hs200);
+ CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
("Card supports HS200 at 1.8V\n"));
+ }
}
}
int f_max;
@@ -1391,6 +1418,46 @@ finish_hs_tests:
f_max = 25000000;
}
}
+ /* If possible, set lower-level signaling */
+ enum mmc_bus_timing timing;
+ /* FIXME: MMCCAM supports max. bus_timing_mmc_ddr52 at the moment. */
+ for (timing = bus_timing_mmc_ddr52; timing > bus_timing_normal;
timing--) {
+ if (isset(&softc->vccq_120, timing)) {
+ /* Set VCCQ = 1.2V */
+ start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
+ start_ccb->ccb_h.flags = CAM_DIR_NONE;
+ start_ccb->ccb_h.retry_count = 0;
+ start_ccb->ccb_h.timeout = 100;
+ start_ccb->ccb_h.cbfcnp = NULL;
+ cts->ios.vccq = vccq_120;
+ cts->ios_valid = MMC_VCCQ;
+ xpt_action(start_ccb);
+ break;
+ } else if (isset(&softc->vccq_180, timing)) {
+ /* Set VCCQ = 1.8V */
+ start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
+ start_ccb->ccb_h.flags = CAM_DIR_NONE;
+ start_ccb->ccb_h.retry_count = 0;
+ start_ccb->ccb_h.timeout = 100;
+ start_ccb->ccb_h.cbfcnp = NULL;
+ cts->ios.vccq = vccq_180;
+ cts->ios_valid = MMC_VCCQ;
+ xpt_action(start_ccb);
+ break;
+ } else {
+ /* Set VCCQ = 3.3V */
+ start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
+ start_ccb->ccb_h.flags = CAM_DIR_NONE;
+ start_ccb->ccb_h.retry_count = 0;
+ start_ccb->ccb_h.timeout = 100;
+ start_ccb->ccb_h.cbfcnp = NULL;
+ cts->ios.vccq = vccq_330;
+ cts->ios_valid = MMC_VCCQ;
+ xpt_action(start_ccb);
+ break;
+ }
+ }
+
/* Set frequency on the controller */
start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
start_ccb->ccb_h.flags = CAM_DIR_NONE;
_______________________________________________
svn-src-head@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
