Author: andrew Date: Thu Jul 26 08:05:28 2012 New Revision: 238789 URL: http://svn.freebsd.org/changeset/base/238789
Log: Add support for the DesignA Electronics Snapper9g45 System on Module. Reviewed by: imp Added: head/sys/arm/at91/board_sn9g45.c (contents, props changed) head/sys/arm/at91/std.sn9g45 (contents, props changed) head/sys/arm/conf/SN9G45 (contents, props changed) Modified: head/sys/arm/at91/files.at91 Added: head/sys/arm/at91/board_sn9g45.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/arm/at91/board_sn9g45.c Thu Jul 26 08:05:28 2012 (r238789) @@ -0,0 +1,55 @@ +/*- + * Copyright (c) 2009 Greg Ansley. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +/* + * DesignA Electronics Snapper9g45 + * http://www.designa-electronics.com/ + */ + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); +#include <sys/param.h> +#include <sys/systm.h> + +#include <machine/board.h> +#include <arm/at91/at91board.h> +#include <arm/at91/at91reg.h> +#include <arm/at91/at91var.h> +#include <arm/at91/at91sam9g45reg.h> +#include <arm/at91/at91_piovar.h> +#include <arm/at91/at91_pio_sam9g45.h> + +long +board_init(void) +{ + + /* PIOB's A periph: Turn the debug USART's TX/RX pins */ + at91_pio_use_periph_a(AT91SAM9G45_PIOB_BASE, AT91C_PB12_DRXD, 0); + at91_pio_use_periph_a(AT91SAM9G45_PIOB_BASE, AT91C_PB13_DTXD, 1); + + return (at91_ramsize()); +} + +ARM_BOARD(SNAPPER9G45, "DesignA Electronics Snapper9G45"); Modified: head/sys/arm/at91/files.at91 ============================================================================== --- head/sys/arm/at91/files.at91 Thu Jul 26 08:01:25 2012 (r238788) +++ head/sys/arm/at91/files.at91 Thu Jul 26 08:05:28 2012 (r238789) @@ -46,4 +46,5 @@ arm/at91/board_qila9g20.c optional at91_ arm/at91/board_sam9260ek.c optional at91_board_sam9260ek arm/at91/board_sam9g20ek.c optional at91_board_sam9g20ek arm/at91/board_sam9x25ek.c optional at91_board_sam9x25ek +arm/at91/board_sn9g45.c optional at91_board_sn9g45 arm/at91/board_tsc4370.c optional at91_board_tsc4370 Added: head/sys/arm/at91/std.sn9g45 ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/arm/at91/std.sn9g45 Thu Jul 26 08:05:28 2012 (r238789) @@ -0,0 +1,12 @@ +#$FreeBSD$ +include "../at91/std.at91sam9g45" + +options STARTUP_PAGETABLE_ADDR=0x70800000 +makeoptions KERNPHYSADDR=0x70008000 +options KERNPHYSADDR=0x70008000 +makeoptions KERNVIRTADDR=0xc0008000 +options KERNVIRTADDR=0xc0008000 + +device at91sam9g45 +device at91_board_sn9g45 + Added: head/sys/arm/conf/SN9G45 ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/arm/conf/SN9G45 Thu Jul 26 08:05:28 2012 (r238789) @@ -0,0 +1,130 @@ +# Kernel configuration for DesignA Electronics Snapper9G45 System on Module +# +# For more information on this file, please read the handbook section on +# Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ + +ident SN9G45 + +include "../at91/std.sn9g45" + +#To statically compile in device wiring instead of /boot/device.hints +#hints "SN9G45.hints" +makeoptions MODULES_OVERRIDE="" + +makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols +options DDB +options KDB + +options SCHED_4BSD #4BSD scheduler +options INET #InterNETworking +#options INET6 #IPv6 communications protocols +options FFS #Berkeley Fast Filesystem +#options SOFTUPDATES #Enable FFS soft updates support +#options UFS_ACL #Support for access control lists +#options UFS_DIRHASH #Improve performance on big directories +#options MD_ROOT #MD is a potential root device +#options MD_ROOT_SIZE=4096 # 3MB ram disk +options NFSCL #New Network Filesystem Client +#options NFSD #New Network Filesystem Server +#options NFSLOCKD #Network Lock Manager +#options NFS_ROOT #NFS usable as /, requires NFSCL +#options BOOTP_NFSROOT +#options BOOTP +#options BOOTP_NFSV3 +#options BOOTP_WIRED_TO=ate0 +#options BOOTP_COMPAT + +options ROOTDEVNAME=\"ufs:/dev/da0s1\" + +options ALT_BREAK_TO_DEBUGGER + +#options MSDOSFS #MSDOS Filesystem +#options CD9660 #ISO 9660 Filesystem +#options PROCFS #Process filesystem (requires PSEUDOFS) +#options PSEUDOFS #Pseudo-filesystem framework +options SCSI_DELAY=1000 #Delay (in ms) before probing SCSI +#options KTRACE #ktrace(1) support +options SYSVSHM #SYSV-style shared memory +options SYSVMSG #SYSV-style message queues +options SYSVSEM #SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions +#options SYSCTL_OMIT_DESCR +options MUTEX_NOINLINE +options RWLOCK_NOINLINE +options NO_FFS_SNAPSHOT +options NO_SWAPPING + +# Debugging for use in -current +#options INVARIANTS #Enable calls of extra sanity checking +#options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS +#options WITNESS #Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed +#options DIAGNOSTIC + +device random +device loop +device bpf +device ether +device md + +device uart # Serial Ports + +# Ethernet +device ate # Ethernet Driver +#device macb # Alternate Ethernet driver +device mii +option AT91_ATE_USE_RMII + +device at91_wdt # WDT: Watchdog timer + +# SCSI peripherals +device scbus # SCSI bus (required for SCSI) +device da # Direct Access (disks) +device cd # CD +device pass # Passthrough device (direct SCSI access) + +# USB support +device ohci # OHCI localbus->USB interface +device usb # USB Bus (required) +device umass # Disks/Mass storage - Requires scbus and da +device uhid # "Human Interface Devices" +#device ulpt # Printer +#device udbp # USB Double Bulk Pipe devices + +# USB Ethernet, requires miibus +device miibus +#device aue # ADMtek USB Ethernet +#device axe # ASIX Electronics USB Ethernet +#device cdce # Generic USB over Ethernet +#device cue # CATC USB Ethernet +#device kue # Kawasaki LSI USB Ethernet +#device rue # RealTek RTL8150 USB Ethernet +device udav # Davicom DM9601E USB + +# USB Wireless +#device rum # Ralink Technology RT2501USB wireless NICs +#device uath # Atheros AR5523 wireless NICs +#device ural # Ralink Technology RT2500USB wireless NICs +#device zyd # ZyDAS zd1211/zd1211b wireless NICs + +# Wireless NIC cards +#device wlan # 802.11 support +#device wlan_wep # 802.11 WEP support +#device wlan_ccmp # 802.11 CCMP support +#device wlan_tkip # 802.11 TKIP support +#device wlan_amrr # AMRR transmit rate control algorithm + _______________________________________________ svn-src-head@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-head To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
