Replying to random ath commit. Now my ath wireless device does not work. It was broken some time after 8 Jun (after my last update at 8 Jun it worked, now after today's update to r251945 it does not).
It spams log and console with messages: Jun 19 10:04:27 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) Jun 19 10:04:58 gpr last message repeated 101 times Jun 19 10:05:42 gpr last message repeated 143 times Jun 19 10:05:42 gpr kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing Jun 19 10:05:42 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) Jun 19 10:05:47 gpr last message repeated 11 times Jun 19 10:05:47 gpr kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing Jun 19 10:05:47 gpr kernel: ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing Jun 19 10:05:47 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) Jun 19 10:05:53 gpr last message repeated 19 times ... Jun 19 10:06:20 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) Jun 19 10:06:21 gpr last message repeated 4 times Jun 19 10:06:22 gpr kernel: ath0: ath_tx_should_swq_frame: f0:4f:7c:fc:b3:22: Node is asleep; sending mgmt (type=0, subtype=176) Jun 19 10:06:22 gpr kernel: ath0: ath_tx_should_swq_frame: f0:4f:7c:fc:b3:22: Node is asleep; sending mgmt (type=0, subtype=176) Jun 19 10:06:22 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) Jun 19 10:06:23 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) Jun 19 10:06:23 gpr kernel: ath0: ath_tx_node_wakeup: an=0xffffff8002322000: node was already awake Jun 19 10:06:24 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) Jun 19 10:06:25 gpr kernel: ath0: stuck beacon; resetting (bmiss count 4) # uname -a FreeBSD gpr.nnz-home.ru 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r251945+1330981: Wed Jun 19 08:09:32 MSK 2013 g...@gpr.nnz-home.ru:/usr/obj/usr/src/freebsd-head/sys/GPR amd64 Boot log device info: Jun 19 10:04:18 gpr kernel: ath0: <Atheros 5212> mem 0xfbdf0000-0xfbdfffff irq 19 at device 10.0 on pci0 Jun 19 10:04:18 gpr kernel: ath0: AR2413 mac 7.9 RF2413 phy 4.5 Jun 19 10:04:18 gpr kernel: ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0056 # pciconf -lv ath0@pci0:0:10:0: class=0x020000 card=0x2051168c chip=0x0013168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'AR5212/AR5213 Wireless Network Adapter' class = network subclass = ethernet # rc.conf wlans_ath0="wlan0" create_args_wlan0="wlandev ath0 wlanmode hostap" ifconfig_wlan0="10.X.X.X/24" hostapd_enable="YES" I can do additional tests or submit more info, if necessary. On Fri, Jun 14, 2013 at 08:15:28AM +0000, Adrian Chadd wrote: > Author: adrian > Date: Fri Jun 14 08:15:28 2013 > New Revision: 251741 > URL: http://svnweb.freebsd.org/changeset/base/251741 > > Log: > The AR9300 HAL uses this config to program AR_PHY_SWITCH_COM_2 on AR9485 > NICs which have bluetooth coexistence enabled. > > The WB225 NIC has the common antenna switch configuration set to 0x0 which > disables all external switch bit setting. This obviously won't work when > doing coexistence. > > This value is a magic value from the windows .inf files. It _looks_ right > but I haven't yet verified it - unfortunately my AR9285+AR3012 BT combo > has an earlier BT device which doesn't actually _have_ firmware on it. > So I have to fix ath3kfw to handle loading in firmware into the newer > NICs before I can finish testing this. > > This may not hold true for CUS198, which is another custom AR9485 board. > > Modified: > head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c > > Modified: head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c > ============================================================================== > --- head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c Fri Jun 14 > 08:13:21 2013 (r251740) > +++ head/sys/contrib/dev/ath/ath_hal/ar9300/ar9300_freebsd.c Fri Jun 14 > 08:15:28 2013 (r251741) > @@ -249,6 +249,9 @@ ar9300_attach_freebsd_ops(struct ath_hal > /* LNA diversity functions */ > ah->ah_divLnaConfGet = ar9300_ant_div_comb_get_config; > ah->ah_divLnaConfSet = ar9300_ant_div_comb_set_config; > + > + /* Setup HAL configuration defaults */ > + ah->ah_config.ath_hal_ant_ctrl_comm2g_switch_enable = 0x000bbb88; > } > > HAL_BOOL > _______________________________________________ > svn-src-head@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/svn-src-head > To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org" > _______________________________________________ svn-src-head@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-head To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"