Author: andrew Date: Sat Dec 20 18:15:23 2014 New Revision: 275961 URL: https://svnweb.freebsd.org/changeset/base/275961
Log: Clean up to use the standard style of "options \t" and "device\t\t" Modified: head/sys/arm/conf/IMX6 Modified: head/sys/arm/conf/IMX6 ============================================================================== --- head/sys/arm/conf/IMX6 Sat Dec 20 16:40:49 2014 (r275960) +++ head/sys/arm/conf/IMX6 Sat Dec 20 18:15:23 2014 (r275961) @@ -21,139 +21,139 @@ ident IMX6 include "../freescale/imx/std.imx6" options HZ=500 # Scheduling quantum is 2 milliseconds. -options SCHED_ULE # ULE scheduler -options PREEMPTION # Enable kernel thread preemption -options INET # InterNETworking -options INET6 # IPv6 communications protocols -options SCTP # Stream Control Transmission Protocol -options FFS # Berkeley Fast Filesystem -options SOFTUPDATES # Enable FFS soft updates support -options UFS_ACL # Support for access control lists -options UFS_DIRHASH # Improve performance on big directories -options UFS_GJOURNAL # Enable gjournal-based UFS journaling -#options MD_ROOT # MD is a potential root device -options NFSCL # New Network Filesystem Client -#options NFSD # New Network Filesystem Server -options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCL +options SCHED_ULE # ULE scheduler +options PREEMPTION # Enable kernel thread preemption +options INET # InterNETworking +options INET6 # IPv6 communications protocols +options SCTP # Stream Control Transmission Protocol +options FFS # Berkeley Fast Filesystem +options SOFTUPDATES # Enable FFS soft updates support +options UFS_ACL # Support for access control lists +options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +#options MD_ROOT # MD is a potential root device +options NFSCL # New Network Filesystem Client +#options NFSD # New Network Filesystem Server +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem -options MSDOSFS # MSDOS Filesystem -options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) -options PSEUDOFS # Pseudo-filesystem framework +options MSDOSFS # MSDOS Filesystem +options CD9660 # ISO 9660 Filesystem +#options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme -options GEOM_PART_GPT # GUID Partition Tables. -options GEOM_LABEL # Provides labelization -options KTRACE # ktrace(1) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions -options INCLUDE_CONFIG_FILE # Include this file in kernel +options GEOM_PART_GPT # GUID Partition Tables. +options GEOM_LABEL # Provides labelization +options KTRACE # ktrace(1) support +options SYSVSHM # SYSV-style shared memory +options SYSVMSG # SYSV-style message queues +options SYSVSEM # SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options INCLUDE_CONFIG_FILE # Include this file in kernel # Debugging support. Always need this: -options KDB # Enable kernel debugger support. +options KDB # Enable kernel debugger support. # For minimum debugger support use KDB_TRACE, for interactive use DDB. -#options KDB_TRACE # Print a stack trace for a panic. -options DDB # Support DDB. +#options KDB_TRACE # Print a stack trace for a panic. +options DDB # Support DDB. # For full debugger support use this instead: -#options GDB # Support remote GDB. +#options GDB # Support remote GDB. # Other debugging options... makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options ALT_BREAK_TO_DEBUGGER # Use <CR><tilde><ctrl-b> to enter debugger. -#options DEBUG -#options DEADLKRES # Enable the deadlock resolver -#options INVARIANTS # Enable calls of extra sanity checking -#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS -#options WITNESS # Enable checks to detect deadlocks and cycles +options ALT_BREAK_TO_DEBUGGER # Use <CR><tilde><ctrl-b> to enter debugger. +#options DEBUG +#options DEADLKRES # Enable the deadlock resolver +#options INVARIANTS # Enable calls of extra sanity checking +#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +#options WITNESS # Enable checks to detect deadlocks and cycles # Pseudo devices. -device loop # Network loopback -device random # Entropy device -device vlan # 802.1Q VLAN support -device tun # Packet tunnel. -device md # Memory "disks" -#device gif # IPv6 and IPv4 tunneling -#device firmware # firmware assist module -device ether # Ethernet support -device miibus # Required for ethernet -device bpf # Berkeley packet filter (required for DHCP) +device loop # Network loopback +device random # Entropy device +device vlan # 802.1Q VLAN support +device tun # Packet tunnel. +device md # Memory "disks" +#device gif # IPv6 and IPv4 tunneling +#device firmware # firmware assist module +device ether # Ethernet support +device miibus # Required for ethernet +device bpf # Berkeley packet filter (required for DHCP) # General-purpose input/output device gpio # Serial (COM) ports -device uart # Multi-uart driver +device uart # Multi-uart driver # SDCard -device sdhci # SD controller -device mmc # SD/MMC protocol -device mmcsd # SDCard disk device +device sdhci # SD controller +device mmc # SD/MMC protocol +device mmcsd # SDCard disk device # SCSI peripherals -device scbus # SCSI bus (required for ATA/SCSI) -device da # Direct Access (disks) -device cd # CD -device pass # Passthrough device (direct ATA/SCSI access) +device scbus # SCSI bus (required for ATA/SCSI) +device da # Direct Access (disks) +device cd # CD +device pass # Passthrough device (direct ATA/SCSI access) # USB support -#options USB_DEBUG # enable debug msgs -device ehci # OHCI USB interface -device usb # USB Bus (required) -device umass # Disks/Mass storage - Requires scbus and da -device uhid # "Human Interface Devices" -device u3g # USB modems -#device ukbd # Allow keyboard like HIDs to control console -#device ums # USB mouse +#options USB_DEBUG # enable debug msgs +device ehci # OHCI USB interface +device usb # USB Bus (required) +device umass # Disks/Mass storage - Requires scbus and da +device uhid # "Human Interface Devices" +device u3g # USB modems +#device ukbd # Allow keyboard like HIDs to control console +#device ums # USB mouse # USB Ethernet, requires miibus -#device aue # ADMtek USB Ethernet -#device axe # ASIX Electronics USB Ethernet -#device cdce # Generic USB over Ethernet -#device cue # CATC USB Ethernet -#device kue # Kawasaki LSI USB Ethernet -#device rue # RealTek RTL8150 USB Ethernet -#device udav # Davicom DM9601E USB +#device aue # ADMtek USB Ethernet +#device axe # ASIX Electronics USB Ethernet +#device cdce # Generic USB over Ethernet +#device cue # CATC USB Ethernet +#device kue # Kawasaki LSI USB Ethernet +#device rue # RealTek RTL8150 USB Ethernet +#device udav # Davicom DM9601E USB # USB Wireless -#device rum # Ralink Technology RT2501USB wireless NICs +#device rum # Ralink Technology RT2501USB wireless NICs # Wireless NIC cards -#device wlan # 802.11 support -#device wlan_wep # 802.11 WEP support -#device wlan_ccmp # 802.11 CCMP support -#device wlan_tkip # 802.11 TKIP support -#device wlan_amrr # AMRR transmit rate control algorithm +#device wlan # 802.11 support +#device wlan_wep # 802.11 WEP support +#device wlan_ccmp # 802.11 CCMP support +#device wlan_tkip # 802.11 TKIP support +#device wlan_amrr # AMRR transmit rate control algorithm # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support # Wandboard has no video console support yet. -#device sc -#device kbdmux -#options SC_DFLT_FONT # compile font in -#makeoptions SC_DFLT_FONT=cp437 +#device sc +#device kbdmux +#options SC_DFLT_FONT # compile font in +#makeoptions SC_DFLT_FONT=cp437 # required for netbooting -#options BOOTP -#options BOOTP_COMPAT -#options BOOTP_NFSROOT -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=ffec0 +#options BOOTP +#options BOOTP_COMPAT +#options BOOTP_NFSROOT +#options BOOTP_NFSV3 +#options BOOTP_WIRED_TO=ffec0 # U-Boot stuff lives on slice 1, FreeBSD on slice 2. -options ROOTDEVNAME=\"ufs:mmcsd0s2a\" +options ROOTDEVNAME=\"ufs:mmcsd0s2a\" # ARM and SoC-specific options -options FDT # Configure using FDT/DTB data. -options SMP # Enable multiple cores -options VFP # Enable floating point hardware support -options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options FDT # Configure using FDT/DTB data. +options SMP # Enable multiple cores +options VFP # Enable floating point hardware support +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) # SoC-specific devices -device ffec # Freescale Fast Ethernet Controller -device fsliic # Freescale i2c/iic -device iic # iic protocol -device iicbus # iic bus -#device imxwdt # Watchdog. WARNING: can't be disabled!!! +device ffec # Freescale Fast Ethernet Controller +device fsliic # Freescale i2c/iic +device iic # iic protocol +device iicbus # iic bus +#device imxwdt # Watchdog. WARNING: can't be disabled!!! _______________________________________________ svn-src-head@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-head To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
