Author: loos
Date: Wed Mar 30 17:18:49 2016
New Revision: 297425
URL: https://svnweb.freebsd.org/changeset/base/297425
Log:
Use the AM33XX_IOPAD() MACRO which is easier to read (uses the same offset
of TRM).
While here remove i2c2_pins, it is already defined in
am335x-bone-common.dtsi.
Sponsored by: Rubicon Communications (Netgate)
Modified:
head/sys/boot/fdt/dts/arm/beaglebone-black.dts
Modified: head/sys/boot/fdt/dts/arm/beaglebone-black.dts
==============================================================================
--- head/sys/boot/fdt/dts/arm/beaglebone-black.dts Wed Mar 30 17:05:04
2016 (r297424)
+++ head/sys/boot/fdt/dts/arm/beaglebone-black.dts Wed Mar 30 17:18:49
2016 (r297425)
@@ -33,15 +33,8 @@
&am33xx_pinmux {
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /*
spi0_d1.i2c1_sda */
- 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /*
spi0_cs0.i2c1_scl */
- >;
- };
-
- i2c2_pins: pinmux_i2c2_pins {
- pinctrl-single,pins = <
- 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /*
uart1_ctsn.i2c2_sda */
- 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /*
uart1_rtsn.i2c2_scl */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2)
/* spi0_d1.i2c1_sda */
+ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2)
/* spi0_cs0.i2c1_scl */
>;
};
};
_______________________________________________
svn-src-head@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
