Author: sgalabov Date: Thu Apr 7 11:16:32 2016 New Revision: 297669 URL: https://svnweb.freebsd.org/changeset/base/297669
Log: Initial import of Ralink/Mediatek MIPS SoC support #4 UART drivers. - uart_dev_mtk.[ch] are the old-style Mediatek/Ralink-specific UART driver as also found in sys/mips/rt305x/uart_dev_rt305x.c, with minor improvements and FDT attachment enabled for the appropriate SoCs. - uart_dev_mtk_ns8250.c is the new-style ns16550a-compatible UART driver found in newer Mediatek SoCs. It uses the uart_dev_ns8250.c driver indirectly and is basically just a wrapper around it and only overrides its probe method. The reason I am not using the uart_dev_ns8250.c driver directly is because I have some code that does UART clock detection before initializing the UART, so that we don't need to hard-code the UART clock frequency in the dts files for each board. Approved by: adrian (mentor) Sponsored by: Smartcom - Bulgaria AD Differential Revision: https://reviews.freebsd.org/D5840 Added: head/sys/mips/mediatek/uart_dev_mtk.c (contents, props changed) head/sys/mips/mediatek/uart_dev_mtk.h (contents, props changed) head/sys/mips/mediatek/uart_dev_mtk_ns8250.c (contents, props changed) Added: head/sys/mips/mediatek/uart_dev_mtk.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/mips/mediatek/uart_dev_mtk.c Thu Apr 7 11:16:32 2016 (r297669) @@ -0,0 +1,552 @@ +/* $NetBSD: uart.c,v 1.2 2007/03/23 20:05:47 dogcow Exp $ */ + +/*- + * Copyright (c) 2013, Alexander A. Mityaev <san...@adm.ua> + * Copyright (c) 2010 Aleksandr Rybalko. + * Copyright (c) 2007 Ruslan Ermilov and Vsevolod Lobko. + * Copyright (c) 2007 Oleksandr Tymoshenko. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + */ + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +#include "opt_ddb.h" + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/bus.h> +#include <sys/conf.h> +#include <sys/kdb.h> +#include <sys/reboot.h> +#include <sys/sysctl.h> +#include <sys/kernel.h> +#include <machine/bus.h> +#include <machine/fdt.h> + +#include <dev/uart/uart.h> +#include <dev/uart/uart_cpu.h> +#include <dev/uart/uart_cpu_fdt.h> +#include <dev/uart/uart_bus.h> + +#include <mips/mediatek/uart_dev_mtk.h> +#include <mips/mediatek/mtk_soc.h> +#include <mips/mediatek/mtk_sysctl.h> + +#include "uart_if.h" + +/* Set some reference clock value. Real value will be taken from FDT */ +#define DEFAULT_RCLK (120 * 1000 * 1000) + +/* + * Low-level UART interface. + */ +static int mtk_uart_probe(struct uart_bas *bas); +static void mtk_uart_init(struct uart_bas *bas, int, int, int, int); +static void mtk_uart_term(struct uart_bas *bas); +static void mtk_uart_putc(struct uart_bas *bas, int); +static int mtk_uart_rxready(struct uart_bas *bas); +static int mtk_uart_getc(struct uart_bas *bas, struct mtx *); + +static struct uart_ops uart_mtk_ops = { + .probe = mtk_uart_probe, + .init = mtk_uart_init, + .term = mtk_uart_term, + .putc = mtk_uart_putc, + .rxready = mtk_uart_rxready, + .getc = mtk_uart_getc, +}; + +static int uart_output = 1; +TUNABLE_INT("kern.uart_output", &uart_output); +SYSCTL_INT(_kern, OID_AUTO, uart_output, CTLFLAG_RW, + &uart_output, 0, "UART output enabled."); + +static int +mtk_uart_probe(struct uart_bas *bas) +{ + return (0); +} + +static void +mtk_uart_init(struct uart_bas *bas, int baudrate, int databits, + int stopbits, int parity) +{ + /* CLKDIV = 384000000/ 3/ 16/ br */ + /* for 384MHz CLKDIV = 8000000 / baudrate; */ + switch (databits) { + case 5: + databits = UART_LCR_5B; + break; + case 6: + databits = UART_LCR_6B; + break; + case 7: + databits = UART_LCR_7B; + break; + case 8: + databits = UART_LCR_8B; + break; + default: + /* Unsupported */ + return; + } + switch (parity) { + case UART_PARITY_EVEN: parity = (UART_LCR_PEN|UART_LCR_EVEN); break; + case UART_PARITY_ODD: parity = (UART_LCR_PEN); break; + case UART_PARITY_NONE: parity = 0; break; + /* Unsupported */ + default: return; + } + + if (bas->rclk && baudrate) { + uart_setreg(bas, UART_CDDL_REG, bas->rclk/16/baudrate); + uart_barrier(bas); + } + + uart_setreg(bas, UART_LCR_REG, databits | + (stopbits==1?0:UART_LCR_STB_15) | + parity); + uart_barrier(bas); +} + +static void +mtk_uart_term(struct uart_bas *bas) +{ + uart_setreg(bas, UART_MCR_REG, 0); + uart_barrier(bas); +} + +static void +mtk_uart_putc(struct uart_bas *bas, int c) +{ + char chr; + if (!uart_output) return; + chr = c; + while (!(uart_getreg(bas, UART_LSR_REG) & UART_LSR_THRE)); + uart_setreg(bas, UART_TX_REG, c); + uart_barrier(bas); + while (!(uart_getreg(bas, UART_LSR_REG) & UART_LSR_THRE)); +} + +static int +mtk_uart_rxready(struct uart_bas *bas) +{ + if (uart_getreg(bas, UART_LSR_REG) & UART_LSR_DR) + return (1); + return (0); +} + +static int +mtk_uart_getc(struct uart_bas *bas, struct mtx *hwmtx) +{ + int c; + + uart_lock(hwmtx); + + while (!(uart_getreg(bas, UART_LSR_REG) & UART_LSR_DR)) { + uart_unlock(hwmtx); + DELAY(10); + uart_lock(hwmtx); + } + + c = uart_getreg(bas, UART_RX_REG); + + uart_unlock(hwmtx); + + return (c); +} + +/* + * High-level UART interface. + */ +struct uart_mtk_softc { + struct uart_softc base; + uint8_t ier_mask; + uint8_t ier; +}; + +static int mtk_uart_bus_attach(struct uart_softc *); +static int mtk_uart_bus_detach(struct uart_softc *); +static int mtk_uart_bus_flush(struct uart_softc *, int); +static int mtk_uart_bus_getsig(struct uart_softc *); +static int mtk_uart_bus_ioctl(struct uart_softc *, int, intptr_t); +static int mtk_uart_bus_ipend(struct uart_softc *); +static int mtk_uart_bus_param(struct uart_softc *, int, int, int, int); +static int mtk_uart_bus_probe(struct uart_softc *); +static int mtk_uart_bus_receive(struct uart_softc *); +static int mtk_uart_bus_setsig(struct uart_softc *, int); +static int mtk_uart_bus_transmit(struct uart_softc *); +static void mtk_uart_bus_grab(struct uart_softc *); +static void mtk_uart_bus_ungrab(struct uart_softc *); + +static kobj_method_t uart_mtk_methods[] = { + KOBJMETHOD(uart_attach, mtk_uart_bus_attach), + KOBJMETHOD(uart_detach, mtk_uart_bus_detach), + KOBJMETHOD(uart_flush, mtk_uart_bus_flush), + KOBJMETHOD(uart_getsig, mtk_uart_bus_getsig), + KOBJMETHOD(uart_ioctl, mtk_uart_bus_ioctl), + KOBJMETHOD(uart_ipend, mtk_uart_bus_ipend), + KOBJMETHOD(uart_param, mtk_uart_bus_param), + KOBJMETHOD(uart_probe, mtk_uart_bus_probe), + KOBJMETHOD(uart_receive, mtk_uart_bus_receive), + KOBJMETHOD(uart_setsig, mtk_uart_bus_setsig), + KOBJMETHOD(uart_transmit, mtk_uart_bus_transmit), + KOBJMETHOD(uart_grab, mtk_uart_bus_grab), + KOBJMETHOD(uart_ungrab, mtk_uart_bus_ungrab), + { 0, 0 } +}; + +struct uart_class uart_mtk_class = { + "uart_mtk", + uart_mtk_methods, + sizeof(struct uart_mtk_softc), + .uc_ops = &uart_mtk_ops, + .uc_range = 1, /* use hinted range */ + .uc_rclk = 0 +}; + +static struct ofw_compat_data compat_data[] = { + { "ralink,rt2880-uart", (uintptr_t)&uart_mtk_class }, + { "ralink,rt3050-uart", (uintptr_t)&uart_mtk_class }, + { "ralink,rt3352-uart", (uintptr_t)&uart_mtk_class }, + { "ralink,rt3883-uart", (uintptr_t)&uart_mtk_class }, + { "ralink,rt5350-uart", (uintptr_t)&uart_mtk_class }, + { "ralink,mt7620a-uart", (uintptr_t)&uart_mtk_class }, + { NULL, (uintptr_t)NULL }, +}; +UART_FDT_CLASS_AND_DEVICE(compat_data); + + +#define SIGCHG(c, i, s, d) \ + if (c) { \ + i |= (i & s) ? s : s | d; \ + } else { \ + i = (i & s) ? (i & ~s) | d : i; \ + } + +/* + * Disable TX interrupt. uart should be locked + */ +static __inline void +mtk_uart_disable_txintr(struct uart_softc *sc) +{ + struct uart_bas *bas = &sc->sc_bas; + uint8_t cr; + + cr = uart_getreg(bas, UART_IER_REG); + cr &= ~UART_IER_ETBEI; + uart_setreg(bas, UART_IER_REG, cr); + uart_barrier(bas); +} + +/* + * Enable TX interrupt. uart should be locked + */ +static __inline void +mtk_uart_enable_txintr(struct uart_softc *sc) +{ + struct uart_bas *bas = &sc->sc_bas; + uint8_t cr; + + cr = uart_getreg(bas, UART_IER_REG); + cr |= UART_IER_ETBEI; + uart_setreg(bas, UART_IER_REG, cr); + uart_barrier(bas); +} + +static int +mtk_uart_bus_attach(struct uart_softc *sc) +{ + struct uart_bas *bas; + struct uart_devinfo *di; + struct uart_mtk_softc *usc = (struct uart_mtk_softc *)sc; + + bas = &sc->sc_bas; + + if (!bas->rclk) { + bas->rclk = mtk_soc_get_uartclk(); + } + + if (sc->sc_sysdev != NULL) { + di = sc->sc_sysdev; + mtk_uart_init(bas, di->baudrate, di->databits, di->stopbits, + di->parity); + } else { + mtk_uart_init(bas, 57600, 8, 1, 0); + } + + sc->sc_rxfifosz = 16; + sc->sc_txfifosz = 16; + + (void)mtk_uart_bus_getsig(sc); + + /* Enable FIFO */ + uart_setreg(bas, UART_FCR_REG, + uart_getreg(bas, UART_FCR_REG) | + UART_FCR_FIFOEN | UART_FCR_TXTGR_1 | UART_FCR_RXTGR_1); + uart_barrier(bas); + /* Enable interrupts */ + usc->ier_mask = 0xf0; + uart_setreg(bas, UART_IER_REG, + UART_IER_EDSSI | UART_IER_ELSI | UART_IER_ERBFI); + uart_barrier(bas); + + return (0); +} + +static int +mtk_uart_bus_detach(struct uart_softc *sc) +{ + return (0); +} + +static int +mtk_uart_bus_flush(struct uart_softc *sc, int what) +{ + struct uart_bas *bas = &sc->sc_bas; + uint32_t fcr = uart_getreg(bas, UART_FCR_REG); + + if (what & UART_FLUSH_TRANSMITTER) { + uart_setreg(bas, UART_FCR_REG, fcr|UART_FCR_TXRST); + uart_barrier(bas); + } + if (what & UART_FLUSH_RECEIVER) { + uart_setreg(bas, UART_FCR_REG, fcr|UART_FCR_RXRST); + uart_barrier(bas); + } + uart_setreg(bas, UART_FCR_REG, fcr); + uart_barrier(bas); + return (0); +} + +static int +mtk_uart_bus_getsig(struct uart_softc *sc) +{ + uint32_t new, old, sig; + uint8_t bes; + + return(0); + do { + old = sc->sc_hwsig; + sig = old; + uart_lock(sc->sc_hwmtx); + bes = uart_getreg(&sc->sc_bas, UART_MSR_REG); + uart_unlock(sc->sc_hwmtx); + /* XXX: chip can show delta */ + SIGCHG(bes & UART_MSR_CTS, sig, SER_CTS, SER_DCTS); + SIGCHG(bes & UART_MSR_DCD, sig, SER_DCD, SER_DDCD); + SIGCHG(bes & UART_MSR_DSR, sig, SER_DSR, SER_DDSR); + new = sig & ~SER_MASK_DELTA; + } while (!atomic_cmpset_32(&sc->sc_hwsig, old, new)); + + return (sig); +} + +static int +mtk_uart_bus_ioctl(struct uart_softc *sc, int request, intptr_t data) +{ + struct uart_bas *bas; + int baudrate, divisor, error; + + bas = &sc->sc_bas; + error = 0; + uart_lock(sc->sc_hwmtx); + switch (request) { + case UART_IOCTL_BREAK: + /* TODO: Send BREAK */ + break; + case UART_IOCTL_BAUD: + divisor = uart_getreg(bas, UART_CDDL_REG); + baudrate = bas->rclk / (divisor * 16); + *(int*)data = baudrate; + break; + default: + error = EINVAL; + break; + } + uart_unlock(sc->sc_hwmtx); + return (error); +} + +static int +mtk_uart_bus_ipend(struct uart_softc *sc) +{ + struct uart_bas *bas; + int ipend; + uint8_t iir, lsr, msr; + +// breakpoint(); + + bas = &sc->sc_bas; + ipend = 0; + + uart_lock(sc->sc_hwmtx); + iir = uart_getreg(&sc->sc_bas, UART_IIR_REG); + lsr = uart_getreg(&sc->sc_bas, UART_LSR_REG); + uart_setreg(&sc->sc_bas, UART_LSR_REG, lsr); + msr = uart_getreg(&sc->sc_bas, UART_MSR_REG); + uart_setreg(&sc->sc_bas, UART_MSR_REG, msr); + if (iir & UART_IIR_INTP) { + uart_unlock(sc->sc_hwmtx); + return (0); + } + switch ((iir >> 1) & 0x07) { + case UART_IIR_ID_THRE: + ipend |= SER_INT_TXIDLE; + break; + case UART_IIR_ID_DR2: + mtk_uart_bus_flush(sc, UART_FLUSH_RECEIVER); + /* passthrough */ + case UART_IIR_ID_DR: + ipend |= SER_INT_RXREADY; + break; + case UART_IIR_ID_MST: + case UART_IIR_ID_LINESTATUS: + ipend |= SER_INT_SIGCHG; + if (lsr & UART_LSR_BI) + ipend |= SER_INT_BREAK; + if (lsr & UART_LSR_OE) + ipend |= SER_INT_OVERRUN; + break; + default: + /* XXX: maybe return error here */ + break; + } + + uart_unlock(sc->sc_hwmtx); + + return (ipend); +} + +static int +mtk_uart_bus_param(struct uart_softc *sc, int baudrate, int databits, + int stopbits, int parity) +{ + uart_lock(sc->sc_hwmtx); + mtk_uart_init(&sc->sc_bas, baudrate, databits, stopbits, parity); + uart_unlock(sc->sc_hwmtx); + return (0); +} + +static int +mtk_uart_bus_probe(struct uart_softc *sc) +{ + int error; + + error = mtk_uart_probe(&sc->sc_bas); + if (error) + return (error); + + device_set_desc(sc->sc_dev, "MTK UART Controller"); + + return (0); +} + +static int +mtk_uart_bus_receive(struct uart_softc *sc) +{ + struct uart_bas *bas; + int xc; + uint8_t lsr; + + bas = &sc->sc_bas; + uart_lock(sc->sc_hwmtx); + lsr = uart_getreg(bas, UART_LSR_REG); + while ((lsr & UART_LSR_DR)) { + if (uart_rx_full(sc)) { + sc->sc_rxbuf[sc->sc_rxput] = UART_STAT_OVERRUN; + break; + } + xc = 0; + xc = uart_getreg(bas, UART_RX_REG); + if (lsr & UART_LSR_FE) + xc |= UART_STAT_FRAMERR; + if (lsr & UART_LSR_PE) + xc |= UART_STAT_PARERR; + if (lsr & UART_LSR_OE) + xc |= UART_STAT_OVERRUN; + uart_barrier(bas); + uart_rx_put(sc, xc); + lsr = uart_getreg(bas, UART_LSR_REG); + } + + uart_unlock(sc->sc_hwmtx); + return (0); +} + +static int +mtk_uart_bus_setsig(struct uart_softc *sc, int sig) +{ + /* TODO: implement (?) */ + return (sig); +} + +static int +mtk_uart_bus_transmit(struct uart_softc *sc) +{ + struct uart_bas *bas = &sc->sc_bas; + int i; + + if (!uart_output) return (0); + + bas = &sc->sc_bas; + uart_lock(sc->sc_hwmtx); + while ((uart_getreg(bas, UART_LSR_REG) & UART_LSR_THRE) == 0); + mtk_uart_enable_txintr(sc); + for (i = 0; i < sc->sc_txdatasz; i++) { + uart_setreg(bas, UART_TX_REG, sc->sc_txbuf[i]); + uart_barrier(bas); + } + sc->sc_txbusy = 1; + uart_unlock(sc->sc_hwmtx); + return (0); +} + +void +mtk_uart_bus_grab(struct uart_softc *sc) +{ + struct uart_bas *bas = &sc->sc_bas; + struct uart_mtk_softc *usc = (struct uart_mtk_softc *)sc; + + uart_lock(sc->sc_hwmtx); + usc->ier = uart_getreg(bas, UART_IER_REG); + uart_setreg(bas, UART_IER_REG, usc->ier & usc->ier_mask); + uart_barrier(bas); + uart_unlock(sc->sc_hwmtx); +} + +void +mtk_uart_bus_ungrab(struct uart_softc *sc) +{ + struct uart_mtk_softc *usc = (struct uart_mtk_softc *)sc; + struct uart_bas *bas = &sc->sc_bas; + + uart_lock(sc->sc_hwmtx); + uart_setreg(bas, UART_IER_REG, usc->ier); + uart_barrier(bas); + uart_unlock(sc->sc_hwmtx); +} Added: head/sys/mips/mediatek/uart_dev_mtk.h ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/mips/mediatek/uart_dev_mtk.h Thu Apr 7 11:16:32 2016 (r297669) @@ -0,0 +1,126 @@ +/*- + * Copyright (c) 2010 Aleksandr Rybalko. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * 3. The names of the authors may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + * + * $FreeBSD$ + */ +#ifndef _MTKUART_H +#define _MTKUART_H + +#undef uart_getreg +#undef uart_setreg +#define uart_getreg(bas, reg) \ + bus_space_read_4((bas)->bst, (bas)->bsh, reg) +#define uart_setreg(bas, reg, value) \ + bus_space_write_4((bas)->bst, (bas)->bsh, reg, value) + +/* UART registers */ +#define UART_RX_REG 0x00 +#define UART_TX_REG 0x04 + +#define UART_IER_REG 0x08 +#define UART_IER_EDSSI (1<<3) /* Only full UART */ +#define UART_IER_ELSI (1<<2) +#define UART_IER_ETBEI (1<<1) +#define UART_IER_ERBFI (1<<0) + +#define UART_IIR_REG 0x0c +#define UART_IIR_RXFIFO (1<<7) +#define UART_IIR_TXFIFO (1<<6) +#define UART_IIR_ID_MST 0 +#define UART_IIR_ID_THRE 1 +#define UART_IIR_ID_DR 2 +#define UART_IIR_ID_LINESTATUS 3 +#define UART_IIR_ID_DR2 6 +#define UART_IIR_ID_SHIFT 1 +#define UART_IIR_ID_MASK 0x0000000e +#define UART_IIR_INTP (1<<0) + +#define UART_FCR_REG 0x10 +#define UART_FCR_RXTGR_1 (0<<6) +#define UART_FCR_RXTGR_4 (1<<6) +#define UART_FCR_RXTGR_8 (2<<6) +#define UART_FCR_RXTGR_12 (3<<6) +#define UART_FCR_TXTGR_1 (0<<4) +#define UART_FCR_TXTGR_4 (1<<4) +#define UART_FCR_TXTGR_8 (2<<4) +#define UART_FCR_TXTGR_12 (3<<4) +#define UART_FCR_DMA (1<<3) +#define UART_FCR_TXRST (1<<2) +#define UART_FCR_RXRST (1<<1) +#define UART_FCR_FIFOEN (1<<0) + +#define UART_LCR_REG 0x14 +#define UART_LCR_DLAB (1<<7) +#define UART_LCR_BRK (1<<6) +#define UART_LCR_FPAR (1<<5) +#define UART_LCR_EVEN (1<<4) +#define UART_LCR_PEN (1<<3) +#define UART_LCR_STB_15 (1<<2) +#define UART_LCR_5B 0 +#define UART_LCR_6B 1 +#define UART_LCR_7B 2 +#define UART_LCR_8B 3 + +#define UART_MCR_REG 0x18 +#define UART_MCR_LOOP (1<<4) +#define UART_MCR_OUT2_L (1<<3) /* Only full UART */ +#define UART_MCR_OUT1_L (1<<2) /* Only full UART */ +#define UART_MCR_RTS_L (1<<1) /* Only full UART */ +#define UART_MCR_DTR_L (1<<0) /* Only full UART */ + +#define UART_LSR_REG 0x1c +#define UART_LSR_ERINF (1<<7) +#define UART_LSR_TEMT (1<<6) +#define UART_LSR_THRE (1<<5) +#define UART_LSR_BI (1<<4) +#define UART_LSR_FE (1<<3) +#define UART_LSR_PE (1<<2) +#define UART_LSR_OE (1<<1) +#define UART_LSR_DR (1<<0) + +#define UART_MSR_REG 0x20 /* Only full UART */ +#define UART_MSR_DCD (1<<7) /* Only full UART */ +#define UART_MSR_RI (1<<6) /* Only full UART */ +#define UART_MSR_DSR (1<<5) /* Only full UART */ +#define UART_MSR_CTS (1<<4) /* Only full UART */ +#define UART_MSR_DDCD (1<<3) /* Only full UART */ +#define UART_MSR_TERI (1<<2) /* Only full UART */ +#define UART_MSR_DDSR (1<<1) /* Only full UART */ +#define UART_MSR_DCTS (1<<0) /* Only full UART */ + +#define UART_CDDL_REG 0x28 +#define UART_CDDLL_REG 0x2c +#define UART_CDDLH_REG 0x30 + +#define UART_IFCTL_REG 0x34 +#define UART_IFCTL_IFCTL (1<<0) + +int uart_cnattach(void); +#endif /* _MTKUART_H */ Added: head/sys/mips/mediatek/uart_dev_mtk_ns8250.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/mips/mediatek/uart_dev_mtk_ns8250.c Thu Apr 7 11:16:32 2016 (r297669) @@ -0,0 +1,113 @@ +/*- + * Copyright (c) 2013 Ian Lepore + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "opt_platform.h" + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/bus.h> +#include <sys/conf.h> +#include <sys/kernel.h> +#include <sys/sysctl.h> +#include <machine/bus.h> + +#include <mips/mediatek/mtk_soc.h> +#include <mips/mediatek/mtk_sysctl.h> + +#include <dev/fdt/fdt_common.h> +#include <dev/ofw/ofw_bus.h> +#include <dev/ofw/ofw_bus_subr.h> + +#include <dev/uart/uart.h> +#include <dev/uart/uart_cpu.h> +#include <dev/uart/uart_cpu_fdt.h> +#include <dev/uart/uart_bus.h> +#include <dev/uart/uart_dev_ns8250.h> + +#include "uart_if.h" + +/* + * High-level UART interface. + */ +static struct uart_class uart_mtk_ns8250_class; +static int mtk_ns8250_bus_probe(struct uart_softc *); + +static kobj_method_t mtk_ns8250_methods[] = { + KOBJMETHOD(uart_probe, mtk_ns8250_bus_probe), + + KOBJMETHOD(uart_attach, ns8250_bus_attach), + KOBJMETHOD(uart_detach, ns8250_bus_detach), + KOBJMETHOD(uart_flush, ns8250_bus_flush), + KOBJMETHOD(uart_getsig, ns8250_bus_getsig), + KOBJMETHOD(uart_ioctl, ns8250_bus_ioctl), + KOBJMETHOD(uart_ipend, ns8250_bus_ipend), + KOBJMETHOD(uart_param, ns8250_bus_param), + KOBJMETHOD(uart_receive, ns8250_bus_receive), + KOBJMETHOD(uart_setsig, ns8250_bus_setsig), + KOBJMETHOD(uart_transmit, ns8250_bus_transmit), + KOBJMETHOD_END +}; + +static struct uart_class uart_mtk_ns8250_class = { + "mtk8250", + mtk_ns8250_methods, + sizeof(struct ns8250_softc), + .uc_ops = &uart_ns8250_ops, + .uc_range = 1, /* use hinted range */ + .uc_rclk = 0, + .uc_rshift = 2 +}; + +static struct ofw_compat_data compat_data[] = { + { "mtk,ns16550a", (uintptr_t)&uart_mtk_ns8250_class }, + { "ns16550a", (uintptr_t)&uart_mtk_ns8250_class }, + { NULL, (uintptr_t)NULL }, +}; +UART_FDT_CLASS_AND_DEVICE(compat_data); + +static int +mtk_ns8250_bus_probe(struct uart_softc *sc) +{ + int status; + + if (!ofw_bus_status_okay(sc->sc_dev)) + return (ENXIO); + + if (ofw_bus_search_compatible(sc->sc_dev, compat_data)->ocd_data == + (uintptr_t)NULL) + return (ENXIO); + + sc->sc_bas.rclk = mtk_soc_get_uartclk(); + + status = ns8250_bus_probe(sc); + if (status == 0) + device_set_desc(sc->sc_dev, "MTK UART Controller (ns16550a)"); + + return (status); +} _______________________________________________ svn-src-head@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/svn-src-head To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"