Author: hselasky Date: Mon Jan 6 09:35:11 2020 New Revision: 356402 URL: https://svnweb.freebsd.org/changeset/base/356402
Log: MFC r327382: Improve usbconfig(8) manual page by adding descriptions for subcommands. Reviewed by: hselasky Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D13445 Modified: stable/10/usr.sbin/usbconfig/usbconfig.8 Directory Properties: stable/10/ (props changed) Modified: stable/10/usr.sbin/usbconfig/usbconfig.8 ============================================================================== --- stable/10/usr.sbin/usbconfig/usbconfig.8 Mon Jan 6 09:24:47 2020 (r356401) +++ stable/10/usr.sbin/usbconfig/usbconfig.8 Mon Jan 6 09:35:11 2020 (r356402) @@ -23,7 +23,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd January 6, 2010 +.Dd December 30, 2017 .Dt USBCONFIG 8 .Os .Sh NAME @@ -56,45 +56,124 @@ The unit and address coordinates may be prefixed by th Show help and available commands. .El .Pp -When called without options, +The following commands may be used with +.Nm : +.Bl -tag -width indent +.It Cm set_config Ar cfg_index +Choose the configuration for the USB device. +Valid values range from zero to the number reported as the +.Ar bNumConfigurations +in +.Cm dump_device_desc +output. +The special value of 255 unconfigures the device, detaching +the interface drivers and reducing the power consumption to minimum, +but without going into power saving mode or detaching from the bus. +In some cases, it prevents the device from charging. +.It Cm set_alt Ar alt_index +Choose the alternate interface for the USB device. +Alternative settings for the current configuration are available as the +.Ar bAlternateSetting +in +.Cm dump_curr_config_desc +output. +Usually there is no need to adjust this setting. +.It Cm set_template Ar template +Set the global USB device side template. +See +.Xr usb_template 4 +for more information. +.It Cm get_template +Get the current USB device side template. +.It Cm add_dev_quirk_vplh Ar vid Ar pid Ar lo_rev Ar hi_rev Ar quirk_name +Add a quirk by specifying the Vendor ID, Product ID, low and high +revision numbers, and the quirk name. +See +.Xr usb_quirk 4 +for more information. +.It Cm remove_dev_quirk_vplh Ar vid Ar pid Ar lo_rev Ar hi_rev Ar quirk_name +Remove a quirk. +.It Cm add_quirk Ar quirk_name +Add quirk for the currently selected USB device. +.It Cm remove_quirk Ar quirk_name +Remove a quirk for the currently selected USB device. +.It Cm dump_quirk_names +Display the list of supported quirk names. +.It Cm dump_device_quirks +Display the list of current device quirks. +.It Cm dump_device_desc +Display the device descriptor. +.It Cm dump_curr_config_desc +Display current configuration descriptor. +.It Cm dump_all_config_desc +Display all the configuration descriptors. +.It Cm dump_string Ar index +Display string descriptor at selected index. +.It Cm dump_info +Display summary information about the device. +.It Cm show_ifdrv +Display the list of interface drivers (such as +.Xr ukbd 4 +or +.Xr u3g 4 ) +currently attached to the device. +.It Cm suspend +Force the device to suspend. +.It Cm resume +Force the device to resume. +.It Cm power_off +Turn the device off. +.It Cm power_save +Turn the automatic suspend and resume on. +This is the default for USB hubs. +.It Cm power_on +Turn the device on and disable automatic suspend and resume. +This is the default for non-hub devices. +.It Cm reset +Reset the device. +This forces the USB stack to reenumerate the bus. +.It Cm list +List all available USB devices. +This is the default if .Nm -prints a list of all available USB devices. +is called without specifying a command. +.It Cm do_request Ar bmReqTyp Ar bReq Ar wVal Ar wIdx Ar wLen Ar data... +Perform a synchronous control request on the specified device. +See +.Xr libusb20_dev_request_sync 3 +for more information. +.El .Sh EXAMPLES +.Pp Show information about the device on USB bus 1 at address 2: .Pp -.Dl usbconfig -u 1 -a 2 dump_info +.Dl usbconfig -d ugen1.2 dump_info .Pp Dump HID descriptor for device on USB bus 1 at address 2: .Pp -.Dl usbconfig -u 1 -a 2 do_request 0x81 0x06 0x2200 0 0x100 +.Dl usbconfig -d ugen1.2 do_request 0x81 0x06 0x2200 0 0x100 .Pp Dump string descriptor at index Z for device on USB bus 1 at address 2: .Pp -.Dl usbconfig -u 1 -a 2 dump_string Z +.Dl usbconfig -d ugen1.2 dump_string Z .Pp Dump current configuration descriptor for device on USB bus 1 at address 2: .Pp -.Dl usbconfig -u 1 -a 2 dump_curr_config_desc +.Dl usbconfig -d ugen1.2 dump_curr_config_desc .Pp Dump device descriptor for device on USB bus 1 at address 2: .Pp -.Dl usbconfig -u 1 -a 2 dump_device_desc +.Dl usbconfig -d ugen1.2 dump_device_desc .Pp Program the device on USB bus 1 at address 2 to suspend, resume, power off, go into power save, or power on: .Pp -.Dl usbconfig -u 1 -a 2 suspend -.Dl usbconfig -u 1 -a 2 resume -.Dl usbconfig -u 1 -a 2 power_off -.Dl usbconfig -u 1 -a 2 power_save -.Dl usbconfig -u 1 -a 2 power_on +.Dl usbconfig -d ugen1.2 suspend +.Dl usbconfig -d ugen1.2 resume +.Dl usbconfig -d ugen1.2 power_off +.Dl usbconfig -d ugen1.2 power_save +.Dl usbconfig -d ugen1.2 power_on .Pp -Display a list of available quirk names: -.Pp -.Dl usbconfig dump_quirk_names -.Pp -See -.Xr usb_quirk 4 -for more information on quirks. .Sh SEE ALSO .Xr usb 4 , -.Xr usb_quirk 4 +.Xr usb_quirk 4 , +.Xr usb_template 4 _______________________________________________ svn-src-stable-10@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/svn-src-stable-10 To unsubscribe, send any mail to "svn-src-stable-10-unsubscr...@freebsd.org"