Author: hselasky
Date: Fri Feb 27 12:22:07 2015
New Revision: 279354
URL: https://svnweb.freebsd.org/changeset/base/279354
Log:
MFC r279233:
Ensure that the XHCI driver will refresh the control endpoint settings
when re-enumerating a FULL speed device. Else the wrong max packet
setting might be used when trying to re-enumerate a FULL speed device.
Modified:
stable/9/sys/dev/usb/controller/xhci.c
Directory Properties:
stable/9/sys/ (props changed)
stable/9/sys/dev/ (props changed)
Modified: stable/9/sys/dev/usb/controller/xhci.c
==============================================================================
--- stable/9/sys/dev/usb/controller/xhci.c Fri Feb 27 12:20:03 2015
(r279353)
+++ stable/9/sys/dev/usb/controller/xhci.c Fri Feb 27 12:22:07 2015
(r279354)
@@ -1395,6 +1395,13 @@ xhci_set_address(struct usb_device *udev
pepext = xhci_get_endpoint_ext(udev,
&udev->ctrl_ep_desc);
+
+ /* ensure the control endpoint is setup again */
+ USB_BUS_LOCK(udev->bus);
+ pepext->trb_halted = 1;
+ pepext->trb_running = 0;
+ USB_BUS_UNLOCK(udev->bus);
+
err = xhci_configure_endpoint(udev,
&udev->ctrl_ep_desc, pepext->physaddr,
0, 1, 1, 0, mps, mps);
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-stable-9
To unsubscribe, send any mail to "[email protected]"
