For last couple of years I have been using an extended version of the FreSWAN diagram and added "duo" and "float"
My motivation was more clear hosts, routing FLOAT with dual uplink. https://libreswan.org/wiki/images/f/f1/Testnet-202102.png I have nsrun that support sunset,sunrise, Tokyo. I also have pacifica, (in memory of Hugh Daniel), behind sunset. And arctic behind the pole. I will update the diagram : Pacifica and arctic. Along these lines, I have another proposal. To use mixed KVM + namesapce setup. The plain nodes, including the nic, could be namespace instead of kvm. I use such setup manually. If and when we tidy up the network diagrams I propose the following too: addresspools should use a separate rage on each host. Such as east pool 192.0.8.0/24 west pool192.0.9.0/24 and special cases you can configure both. On Mon, Jul 25, 2022 at 05:02:56PM -0400, Andrew Cagney wrote: > I'd like to add a domain to the test framework. The motivation is to > allow end-to-end testing of scenarios where non IPsec domains route > their traffic through IPsec gateways. For instance: > > {ROAD,TRAIN} - NORTH = NIC - {EAST,WEST} > > where NORTH and NIC would be running libreswan, while ROAD, TRAIN, > EAST, and WEST would not. > Currently this is implemented by injecting packets into the back > interface of domains such as NORTH, which isn't quite the same thing. > > My suggestion is to make two changes: > - add a second interface to ROAD so that it can route packets through NORTH > - add a new domain TRAIN that is behind NORTH > see https://libreswan.org/wiki/Test_Suite#Proposed_Network_Diagram > > For reference: > Here's the original diagram: > https://libreswan.org/wiki/Test_Suite#Original_Network_Diagram > And here's how things are today: > https://libreswan.org/wiki/Test_Suite#Network_Diagram > _______________________________________________ > Swan-dev mailing list > Swan-dev@lists.libreswan.org > https://lists.libreswan.org/mailman/listinfo/swan-dev _______________________________________________ Swan-dev mailing list Swan-dev@lists.libreswan.org https://lists.libreswan.org/mailman/listinfo/swan-dev