yeah, thank you
I got it running with some massive headache and massive trying and
resetting. finally it works. let's see what happens after next router
restart.....
you have to set it to brige mode with the Assitant. I always selected
the Advanced setup. d'oh
silvan
Am 22.11.2007 um 10:28 schrieb Manuel Wenger:
It does indeed work. After upgrading the firmware to the latest
version found on the Studerus web site, you need to perform a full
factory reset (pushing the reset button for >10 seconds), then
configure the 2802 in bridge mode *without* going through PPP mode
first.
Now comes the fun part: connect your PPP client, and wait. After
30-60 minutes the PPP session will be up and running.
It's actually a bug in the firmware. The 2802 sends an ARP request
to the Swisscom DSLAM even when in bridge mode. This triggers some
kind of ARP filter on the Swisscom side, and you will be unable to
log in with your PPP client for some time. For some reason, it only
does this the first time. It works immediately after subsequent
power-cycles.
-Manuel
_______________________________________________
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
_______________________________________________
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog