Right now not anymore. Have to use as8404 ;o( This was better then when I worked at as1836 where I did the msdp peering for my self. Also it would be nice to reuse the assigned /48 again (o;
Does anyone of you ever used mcast (besides ospf ;o)? thx for listening Rick >Hi Richard, >Where is your multicast test-network connected to the internet ? >Andr� > >At 14:04 11.01.2002 +0100, Richard Klingler wrote: >>Hello together....(o; >> >>Does anybody know where I can get multicast >>connectivitiy for testing my developed >>embedded multicast hardware? >> >>Right now a 10 by 5 square cm hardware plays >>mp3 directly with builtin ethernet and tcp/ip stack. >>The same module will be used to build an embedded >>streaming server with encoding in hardware. >> >>Therefore I would like to setup a mcast tunnel >>to check for real life conditions. >> >>I know that kq and switch are providing direct >>mcast connectivity but not mcast tunneling. >> >>Any ideas? >> >> >>thanx again for listening >>Rick >> >>---------------------------------------------- >>[EMAIL PROTECTED] Maillist-Archive: >>http://www.mail-archive.com/swinog%40swinog.ch/ > >--------------------- >Andr� Chapuis >IP+ Engineering >Swisscom Ltd >Genfergasse 14 >3050 Bern >+41 31 893 89 61 >[EMAIL PROTECTED] >CCIE #6023 >--------------------- > >---------------------------------------------- >[EMAIL PROTECTED] Maillist-Archive: >http://www.mail-archive.com/swinog%40swinog.ch/ ---------------------------------------------- [EMAIL PROTECTED] Maillist-Archive: http://www.mail-archive.com/swinog%40swinog.ch/
