On Fri, 2008-01-25 at 13:37 +0700, Patrick Shirkey wrote: > On Thu, 2008-01-24 at 13:35 +0000, Mark Ellis wrote: > > On Mon, 2008-01-21 at 12:11 +0700, Patrick Shirkey wrote: > > > Hi, > > > > > > With the latest svn I am able to see two devices at the same time. Nice > > > work!!! > > > > > > > With serial WM2003 devices I assume, cool, thanks for letting us know. > > > > Are you using vdccm or odccm ? > > > > I have windows ce-5.0 running on these device and I'm using usb to > connect. > > I tested with vdccm but I can test with odccm too if it is helpful. > >
If you wouldn't mind that would be great. > > > What is the address scheme for browsing the players? > > > > > > If I browse to rapip:/ in konqueror I get access to the device on ppp1. > > > > > > How can I browse to the device on ppp0? > > > > > > > Off the top of my head (don't use rapip much), and guessing you're using > > vdccm, it's either the device name or ip after the rapip part, depending > > on how you've got vdccm addressing devices. Without specifying which > > device you want, you get ppp1 because vdccm makes the last connected > > device the default. > > Thanks. Will check it out. > > > Cheers. > > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ SynCE-Devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/synce-devel
