I usually have two network interfaces on my laptops (one eth and one wlan), and when I was using sysvinit I also was configuring the bond interface via the /etc/network/interfaces file so the two interfaces could work in the active-backup mode. But now, they work in balance-rr mode which is set via the .netdev file. The problem with this mode is that when you have, let's say wifi 30mbit/s and wired 100mbit/s, you can get 60mbit/s max, and that's why I wanted to use the active-backup mode which switches from wire to wifi and vice versa depending on whether the ethernet cable is plugged in. Generally speaking, I have to set some additional parameters so this could work well, and that would be:
... bond-primary eth1 bond-primary-reselect always bond-slaves eth1 wlan0 bond-fail-over-mac none ... I'm not sure if all of them are necessary, and the question is how to pass these parameters in systemd? I'm asking because in the systemd.netdev manual, in the bond section, these options weren't specified.
pgpl2qWMR7FIw.pgp
Description: OpenPGP digital signature
_______________________________________________ systemd-devel mailing list systemd-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/systemd-devel
