Hi, following https://systemd.io/AUTOMATIC_BOOT_ASSESSMENT/#how-to-adapt-this-scheme-to-other-setups I've been experimenting on a fedora system with systemd-boot-check-no-failures.service and the ability to have services run "after" boot-complete.target. The basic use case would just to have something that checks services are up and running, reach boot-complete if they are, and start other services afterwards. I've taken from that blog this piece specifically: ``` To support additional components that shall only run on boot success, simply wrap them in a unit and order them after boot-complete.target, pulling it in. ``` So I've done the following with an example service and by enabling :
# cat /etc/systemd/system/test.service [Unit] Description="Order after boot-complete.target, pulling it in" After=boot-complete.target Requires=boot-complete.target [Service] Type=oneshot ExecStart=/usr/bin/echo "Additional component that shall only run on boot success" RemainAfterExit=yes [Install] WantedBy=default.target # systemctl enable test.service systemd-boot-check-no-failures.service Created symlink /etc/systemd/system/default.target.wants/test.service → /etc/systemd/system/test.service. Created symlink /etc/systemd/system/boot-complete.target.requires/systemd-boot-check-no-failures.service → /usr/lib/systemd/system/systemd-boot-check-no-failures.service. # systemctl reboot Unfortunately, the above results in: systemd[1]: multi-user.target: Found ordering cycle on test.service/start systemd[1]: multi-user.target: Found dependency on boot-complete.target/start systemd[1]: multi-user.target: Found dependency on systemd-boot-check-no-failures.service/start systemd[1]: multi-user.target: Found dependency on multi-user.target/start systemd[1]: multi-user.target: Job test.service/start deleted to break ordering cycle starting with multi-user.target/start so what's the correct way to perform the mentioned "order [units] after boot-complete.target", if they cannot be pulled in through the usual default/multi-user targets? If I add DefaultDependencies=no to test.service it now appears to work w/o the dependency cycle. thanks! -- Antonio (runcom) Murdaca Principal Software Engineer B056 8311 87B3 DDEB 25B5 01AF CC5C 9A81 EDCA D821