> I followed the set up of tails on a usb drive as per the tails web site ,
> however since I have a UFEI BIOS-(windows 10) then the universal usb
> installer will not work
>
> The alternative it seems is to use a software called Rufus 2.5.799
> Here are the options that I think may be correct. please find log at foot of
> this email.
>
> Divce:
> maas 8gb
>
> Partition scheme and target system type:
> MBR partition scheme for BIOS or UFEI
>
> File system:
> FAT32(default)
>
> Cluster size:
> 4096 bytes (default)
>
> new volume label
> tails 1.7
>
> create a bootable disk using:
> ISO image
>
> there are other options to choose from which I did not take advantage of just
> yet
>
> Here is the log which stops at the last entry for some reason:
>
> Found USB 2.0 device 'Lexar USB Flash Drive USB Device' (05DC:A81D)
> 1 device found
> Disk type: Removable, Sector Size: 512 bytes
> Cylinders: 974, TracksPerCylinder: 255, SectorsPerTrack: 63
> Partition type: MBR, NB Partitions: 1
> Disk ID: 0x0031A317
> Drive has a Syslinux Master Boot Record
> Partition 1:
> Type: FAT32 (0x0b)
> Size: 7.5 GB (8015314944 bytes)
> Start Sector: 2048, Boot: No, Recognized: Yes
> Scanning image...
> ISO analysis:
> Image is an ISO9660 image
> Will use '/isolinux/isolinux.cfg' for Syslinux
> Detected Syslinux version: 6.03/20150326 (from '/EFI/BOOT/isolinux.bin')
> Disk image analysis:
> Image has an unknown Master Boot Record
> Image is a bootable disk image
> ISO label: 'TAILS 1.7 - 20151103'
> Size: 1052835840 bytes
> Has a >64 chars filename: No
> Has Symlinks: No
> Has a >4GB file: No
> Uses Bootmgr: No
> Uses EFI: Yes
> Uses Grub 2: No
> Uses Grub4DOS: No
> Uses isolinux: Yes (6.03)
> Uses KolibriOS: No
> Uses ReactOS: No
> Uses WinPE: No
> Using image: tails-i386-1.7.iso
>
> Computing checksum for 'C:\Users\akincana\Downloads\tails-i386-1.7.iso'...
> MD5: dfbc1337a118a2fc87e7bfeaf8e8870e
> SHA1: b53fb15773da339a16595c047b71ffd9a88255da
> SHA256: 372ba423c46ce76393f5e8cd64136e5e9c4a806def993951fe8dbf7d93be2546
> Downloading 'ldlinux.sys' from
> http://rufus.akeo.ie/files/syslinux-6.03/20150326/ldlinux.sys
> Unable to access file: 404
> Extended version was not found, trying main version
> Downloading 'ldlinux.sys' from
> http://rufus.akeo.ie/files/syslinux-6.03/ldlinux.sys[http://rufus.akeo.ie/files/syslinux-6.03/ldlinux.sys]
> File length: 68599 bytes
> Successfully downloaded 'ldlinux.sys'
> Downloading 'ldlinux.bss' from
> http://rufus.akeo.ie/files/syslinux-6.03/20150326/ldlinux.bss[http://rufus.akeo.ie/files/syslinux-6.03/20150326/ldlinux.bss]
> Unable to access file: 404
> Extended version was not found, trying main version
> Downloading 'ldlinux.bss' from
> http://rufus.akeo.ie/files/syslinux-6.03/ldlinux.bss[http://rufus.akeo.ie/files/syslinux-6.03/ldlinux.bss]
> File length: 512 bytes
> Successfully downloaded 'ldlinux.bss'
>
> Format operation started
> Requesting disk access...
> Opened drive \\.\PHYSICALDRIVE1 for write access
> Will use 'G:' as volume mountpoint
> I/O boundary checks disabled
> Analyzing existing boot records...
> Drive has a Syslinux Master Boot Record
> Volume has an unknown Partition Boot Record
> Deleting partitions...
> Clearing MBR/PBR/GPT structures...
> Erasing 128 sectors
> Partitioning (MBR)...
> Closing existing volume...
> Waiting for logical drive to reappear...
> Formatting (FAT32)...
> Using cluster size: 4096 bytes
> Slow format was selected
> Creating file system...
> Format completed.
> Writing master boot record...
> Drive has a Zeroed Master Boot Record
> Set bootable USB partition as 0x80
> Using Syslinux MBR
> Found volume GUID \\?\Volume{ac77ce43-9b11-11e5-9bef-0c5b8f279a64}\
> Installing Syslinux 6.03...
> Using existing './rufus_files/syslinux-6.03/20150326/ldlinux.sys'
> Using existing './rufus_files/syslinux-6.03/20150326/ldlinux.bss'
> Successfully wrote 'ldlinux.sys'
> Opened drive \\?\Volume{ac77ce43-9b11-11e5-9bef-0c5b8f279a64} for write access
> Successfully wrote Syslinux boot record
> Successfully remounted Volume{ac77ce43-9b11-11e5-9bef-0c5b8f279a64}\ on G:\
> Copying ISO files...
> Extracting files...
> libcdio: Found Extension: Joliet Level 3
> Image is an ISO9660 image
> This image will be extracted using Joliet extensions (if present)
> Extracting: G:\.disk\archive_trace (1 bytes)
> Extracting: G:\.disk\info (80 bytes)
> Extracting: G:\EFI\BOOT\bootia32.efi (294.5 KB)
> Extracting: G:\EFI\BOOT\bootx64.efi (175.1 KB)
> Extracting: G:\EFI\BOOT\bootx64.png (7.1 KB)
> Extracting: G:\EFI\BOOT\cat.c32 (2.3 KB)
> Extracting: G:\EFI\BOOT\chain.c32 (27.7 KB)
> Extracting: G:\EFI\BOOT\cmd.c32 (1.8 KB)
> Extracting: G:\EFI\BOOT\cmenu.c32 (5 KB)
> Extracting: G:\EFI\BOOT\config.c32 (2.1 KB)
> Extracting: G:\EFI\BOOT\cptime.c32 (5.2 KB)
> Extracting: G:\EFI\BOOT\cpu.c32 (5.5 KB)
> Extracting: G:\EFI\BOOT\cpuid.c32 (2.4 KB)
> Extracting: G:\EFI\BOOT\cpuidtest.c32 (3.5 KB)
> Extracting: G:\EFI\BOOT\debug.c32 (2.2 KB)
> Extracting: G:\EFI\BOOT\dhcp.c32 (5.2 KB)
> Extracting: G:\EFI\BOOT\disk.c32 (2.7 KB)
> Extracting: G:\EFI\BOOT\dmi.c32 (10 KB)
> Extracting: G:\EFI\BOOT\dmitest.c32 (14.1 KB)
> Extracting: G:\EFI\BOOT\elf.c32 (4.2 KB)
> Extracting: G:\EFI\BOOT\ethersel.c32 (3.7 KB)
> Extracting: G:\EFI\BOOT\f1.txt (841 bytes)
> Extracting: G:\EFI\BOOT\f10.txt (728 bytes)
> Extracting: G:\EFI\BOOT\f2.txt (424 bytes)
> Extracting: G:\EFI\BOOT\f3.txt (597 bytes)
> Extracting: G:\EFI\BOOT\f4.txt (357 bytes)
> Extracting: G:\EFI\BOOT\f5.txt (807 bytes)
> Extracting: G:\EFI\BOOT\f6.txt (1.1 KB)
> Extracting: G:\EFI\BOOT\f7.txt (933 bytes)
> Extracting: G:\EFI\BOOT\f8.txt (181 bytes)
> Extracting: G:\EFI\BOOT\f9.txt (747 bytes)
> Extracting: G:\EFI\BOOT\gfxboot.c32 (13.1 KB)
> Extracting: G:\EFI\BOOT\gpxecmd.c32 (2.3 KB)
> Extracting: G:\EFI\BOOT\grub\grub.cfg (413 bytes)
_______________________________________________
Tails-dev mailing list
[email protected]
https://mailman.boum.org/listinfo/tails-dev[https://mailman.boum.org/listinfo/tails-dev]
To unsubscribe from this list, send an empty email to
[email protected].
_______________________________________________
tails-support mailing list
[email protected]
https://mailman.boum.org/listinfo/tails-support
To unsubscribe from this list, send an empty email to
[email protected].
