Hi Rich, Thanks for your reply. I remember from the good ol' DOS days that Control C would terminate sessions. I then tried the Key "^" which didn't work. The "^" did not script into SmarTerm. As a test, i tried to key script "!!!!!" or "&&&&&" which worked fine. When i tried to Key "^^^^^^^", this did not script through. That's when i wrote the original e-mail... I'll have a look through the Bss6.stm macro. Cheers, Kelvin
________________________________ From: [EMAIL PROTECTED] on behalf of Rich McNeil Sent: Wed 16/08/2006 3:06 PM To: [email protected] Subject: RE: [Talk] Keying "^" in Smarterm Emulation Application Kelvin, What is likely happening is that the ^C is being translated by Smarterm as a control-C which usually acts to send a break character to the emulation. This appears to disconnect it. Just to be sure you might verify this from the keyboard. The WorkStation connects to Smarterm using the Bss6.stm macro which you can view and modify. You can see how we key in an Enter by decoding a Key "{Enter}" string. You might mimic this logic and add a line to decode Key "{^}" as the single "^" character. Rich McNeil Boston Software Systems 866 653 5105 x 813 www.bostonworkstation.com LEGAL NOTICE Unless expressly stated otherwise, this message is confidential and may be privileged. It is intended for the addressee(s) only. Access to this E-mail by anyone else is unauthorized. If you are not an addressee, any disclosure or copying of the contents of this E-mail or any action taken (or not taken) in reliance on it is unauthorized and may be unlawful. If you are not an addressee, please inform the sender immediately, then delete this message and empty from your trash. ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lam, Kelvin [CORP] Sent: Monday, August 14, 2006 2:21 PM To: [email protected] Subject: [Talk] Keying "^" in Smarterm Emulation Application Hello, I'm trying to key "^" within my script. This key isn't showing up in my stream. I've tried other symbols, and they are working fine. Originally, my goal was to enter "^CAL" within my script. However, whenever this passed through the script, this disconnects me from my connection via the emulator application. (i'm currently using Smarterm Version 12). I was attempting to split the entry into 2 steps; Key "^", and then Enter "CAL" right after. This didn't work. Any other ideas?? Thanks, Kelvin Lam LIS Analyst Vancouver Coastal Health ph: 604-988-3131 x4735
