I used to have Dialog box issues...Adding a Connect command after the dialog box function has been completed fixed it. With this problem, I can't even get rule to launch the dialog box. weird. Trying on another machine with a slightly older workstation version. I've been using the 4.xx versions for so long, not even sure if I would know how to use the 3.xx versions. :) Thanks.
Brian Bennett Affinity Health Systems PBS\Clinic Billing (920)628-9055 [EMAIL PROTECTED] _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lori Kent Sent: Friday, January 04, 2008 10:29 AM To: '[email protected]' Subject: Re: [Talk] MeditechNUI connections Those overly used dialog boxes in NUI cause me problems sometimes. I'm finding myself using many more steps than I needed in the 3.x version of Meditech. It's because all of the error messages have the same conditions. At least, that is what I have found. So, I have to check to for one condition, move to a step, then check another condition, move to another step. I have complained to Meditech about their unnamed windows, and too many dialog boxes. Lori S Kent, Database Analyst Catawba Valley Medical Center 810 Fairgrove Church Road SE Hickory, NC 28602 phone: 828.326.2024 email: <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] Catawba Valley Medical Center 810 Fairgrove Church Rd Hickory NC 28602 828-326-3000 "This electronic message may contain information that is confidential and/or legally privileged. It is intended only for the use of the individual(s) and/or entity named as recipients in the message. Please notify the sender immediately and delete the material from your computer if you have received this message in error. Do not deliver, distribute, or copy this message, and do not disclose its contents or take any action as a result of the information it contains. Thank you." >>> "Bennett, Brian" <[EMAIL PROTECTED]> 01/04/2008 11:03 AM >>> If any one uses MeditechNUI are you having a problem where a rule refuses to acknowledge the condition? I'm working on changing some of my VBA scripts to Rules based since it seems that Rules are so much more robust, but the rules advance so far and then act as if the screen condition is never met and will not execute the rule. I'm using BWS 9.611 and Magic workstation 4.20e. Do I need to drop back a few magic versions? I have the same problem with the VB scripts, but using a Connect ("MeditechNUI"), stStream command after each function forces it to work. Thanks. Brian Bennett Affinity Health Systems PBS\Clinic Billing (920)628-9055 [EMAIL PROTECTED] -- This message has been scanned for viruses and dangerous content, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by, and is believed to be clean.
