[EMAIL PROTECTED] - Digest Tuesday, May 30 2000 Volume 01 : Number 002 ---------------------------------------------------------------------- Date: Mon, 29 May 2000 05:35:38 +0200 From: Christian Felsing <[EMAIL PROTECTED]> Subject: Re: AW: [PUG] Slackware und ISDN - --------------DA15BE048A0349CC184BC0DA Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Hi, die Devices musst Du handish anlegen. Im isdn4linux Packet ist irgendwo e= in Shellskript daf=FCr dabei (gewesen). Hier die n=F6tigen Devices: crw------- 1 root root 45, 0 Mar 24 22:58 /dev/isdn0 =2E.. crw------- 1 root root 45, 15 Mar 24 22:58 /dev/isdn15 lrwxrwxrwx 1 root root 9 May 21 10:59 /dev/isdnctrl -> isdnctrl0 crw------- 1 root root 45, 64 Mar 24 22:58 /dev/isdnctrl0 =2E.. crw------- 1 root root 45, 79 Mar 24 22:58 /dev/isdnctrl15 cr--r--r-- 1 root root 45, 255 Mar 24 22:58 /dev/isdninfo crw------- 1 root root 45, 128 Mar 24 22:58 /dev/ippp0 =2E.. crw------- 1 root root 45, 143 Mar 24 22:58 /dev/ippp15 Der o.g. Link ist wichtig, sonst geht isdnctrl nicht. Es k=F6nnen =FCbrig= ens jeweils bis zu 63 Devices angelegt werden, aber wenn Du nicht gerade eine= n Primux Anschluss hast, dann ist das Unsinn. Mit Kernel-2.3.99pre9 entf=E4= llt diese l=E4stige Arbeit. Da gibt es ein Pseude FS /dev, das =E4hnlich dem = /proc arbeitet =3D> Niemals wieder Devices anlegen :-) Christian AtomX wrote: > so, ich habe jetzt den kram jetzt kompiliert. was jetzt ? > ich hab mal mit "modprobe isdn" das modul geladen. aber ich habe nicht = das > device /dev/isdn oder /dev/ippp0 . > 1. wie bekomme ich das device. (slackware installation ist echt hart) > 2. wie starte ich das module beim booten > 3. wie gehts dann weiter? > > meine isdn karte ist nen Fritz PCI > > -----------------------------------------------------------------------= - ---- > PUG - Penguin User Group Wiesbaden - http://www.pug.org - --------------DA15BE048A0349CC184BC0DA Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> <body text="#000000" bgcolor="#999999" link="#0000FF" vlink="#FF0000" alink="#000088"> Hi, <p>die Devices musst Du handish anlegen. Im isdn4linux Packet ist irgendwo ein Shellskript dafür dabei (gewesen). Hier die nötigen Devices: <p><tt>crw------- 1 root root 45, 0 Mar 24 22:58 /dev/isdn0</tt> <br><tt>...</tt> <br><tt>crw------- 1 root root 45, 15 Mar 24 22:58 /dev/isdn15</tt><tt></tt> <p><tt>lrwxrwxrwx 1 root root 9 May 21 10:59 /dev/isdnctrl -> isdnctrl0</tt> <br><tt>crw------- 1 root root 45, 64 Mar 24 22:58 /dev/isdnctrl0</tt> <br><tt>...</tt> <br><tt>crw------- 1 root root 45, 79 Mar 24 22:58 /dev/isdnctrl15</tt> <br><tt>cr--r--r-- 1 root root 45, 255 Mar 24 22:58 /dev/isdninfo</tt><tt></tt> <p><tt>crw------- 1 root root 45, 128 Mar 24 22:58 /dev/ippp0</tt> <br><tt>...</tt> <br><tt>crw------- 1 root root 45, 143 Mar 24 22:58 /dev/ippp15</tt> <p>Der o.g. Link ist wichtig, sonst geht isdnctrl nicht. Es können übrigens jeweils bis zu 63 Devices angelegt werden, aber wenn Du nicht gerade einen Primux Anschluss hast, dann ist das Unsinn. Mit Kernel-2.3.99pre9 entfällt diese lästige Arbeit. Da gibt es ein Pseude FS /dev, das ähnlich dem /proc arbeitet => Niemals wieder Devices anlegen :-) <p>Christian <p>AtomX wrote: <blockquote TYPE=CITE>so, ich habe jetzt den kram jetzt kompiliert. was jetzt ? <br>ich hab mal mit "modprobe isdn" das modul geladen. aber ich habe nicht das <br>device /dev/isdn oder /dev/ippp0 . <br>1. wie bekomme ich das device. (slackware installation ist echt hart) <br>2. wie starte ich das module beim booten <br>3. wie gehts dann weiter? <p>meine isdn karte ist nen Fritz PCI <p>--------------------------------------------------------------------------- <br>PUG - Penguin User Group Wiesbaden - <a href="http://www.pug.org">http://www.pug.org</a></blockquote> </body> </html> - --------------DA15BE048A0349CC184BC0DA-- ------------------------------ Date: Mon, 29 May 2000 06:42:03 +0200 From: "Schmitt, Martin (Zentrale - OR AI B)" <[EMAIL PROTECTED]> Subject: AW: AW: [PUG] Slackware und ISDN Ginge das evtl. auch ohne HTML? Danke! - -martin - -----Ursprüngliche Nachricht----- Von: Christian Felsing [mailto:[EMAIL PROTECTED]] Gesendet: Montag, 29. Mai 2000 05:36 An: [EMAIL PROTECTED] Betreff: Re: AW: [PUG] Slackware und ISDN (lösch) ------------------------------ Date: Mon, 29 May 2000 14:20:12 +0200 From: "Herbert Benz" <[EMAIL PROTECTED]> Subject: [PUG] Linux This is a multi-part message in MIME format. - ------=_NextPart_000_0006_01BFC979.006AFAA0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hallo! In Rahmen meinem Studium mu=DF ich eine m=FCndliche Pr=FCfung in Linux = ablegen. Die Aufgabe: Server-Client betrieb auf Linux, der Server dient als Datei und Druck Server, auch die Programme sind auf den Server gespeichert, einige automatische Abl=E4ufe z. B. Sicherung Wer kann mir da weiterhelfen? Wohne in Wiesbaden wir k=F6nnen uns Treffen, tel 0611/1840664 oder = 01782439880, die Getr=E4nke gehen auf mich! F=FCr eine Hilfestellung w=E4re ich sehr dankbar! Bis dann Herbert Benz. DANKE!!!!! - ------=_NextPart_000_0006_01BFC979.006AFAA0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=3D"text/html; charset=3Diso-8859-1" = http-equiv=3DContent-Type> <META content=3D"MSHTML 5.00.2919.6307" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2>Hallo!</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>In Rahmen meinem Studium mu=DF ich eine = m=FCndliche=20 Pr=FCfung in Linux ablegen.</FONT></DIV> <DIV><FONT face=3DArial size=3D2>Die Aufgabe: Server-Client betrieb auf=20 Linux,</FONT></DIV> <DIV><FONT face=3DArial size=3D2> =20 der Server = dient als=20 Datei und Druck Server,</FONT></DIV> <DIV><FONT face=3DArial size=3D2> =20 auch die = Programme sind=20 auf den Server gespeichert,</FONT></DIV> <DIV><FONT face=3DArial size=3D2> =20 einige = automatische=20 Abl=E4ufe z. B. Sicherung</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>Wer kann mir da = weiterhelfen?</FONT></DIV> <DIV><FONT face=3DArial size=3D2>Wohne in Wiesbaden wir k=F6nnen uns = Treffen, tel=20 0611/1840664 oder 01782439880, die Getr=E4nke gehen auf = mich!</FONT></DIV> <DIV><FONT face=3DArial size=3D2>F=FCr eine Hilfestellung w=E4re ich = sehr=20 dankbar!</FONT></DIV> <DIV><FONT face=3DArial size=3D2>Bis dann Herbert Benz.</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>DANKE!!!!!</FONT></DIV></BODY></HTML> - ------=_NextPart_000_0006_01BFC979.006AFAA0-- ------------------------------ Date: Mon, 29 May 2000 12:25:56 GMT From: Martin Schmitt <[EMAIL PROTECTED]> Subject: Re: [PUG] Linux > In Rahmen meinem Studium muß ich eine mündliche Prüfung in Linux > ablegen. > Wer kann mir da weiterhelfen? http://www.redhat.de/training/rh300_desc.php3 - -martin - -- The only person who got his work done by Friday was Crusoe. ------------------------------ Date: Mon, 29 May 2000 19:42:03 +0200 From: Martin Schmitt <[EMAIL PROTECTED]> Subject: [PUG] ILOVEYOU This is the Unix version of "I Love You". It works on the honor system. If you receive this mail, you should delete a bunch of GIFs, MP3s, and binaries from your home directory, then send a copy of this e-mail to everyone you know. Thanks for your cooperation. ------------------------------ Date: Mon, 29 May 2000 21:17:43 +0200 From: Patrick Glanz <[EMAIL PROTECTED]> Subject: Re: [PUG] Linux Erst mußt Du mal das Betriebssystem und die Mailingsoftware wechseln, denn damit wird das mit Deiner Prüfung schon mal nix: X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Cheers, Patrick In Rahmen meinem Studium muß ich eine mündliche Prüfung in Linux ablegen. Die Aufgabe: Server-Client betrieb auf Linux, der Server dient als Datei und Druck Server, auch die Programme sind auf den Server gespeichert, einige automatische Abläufe z. B. Sicherung Herbert Benz wrote: > Part 1.1 Type: Plain Text (text/plain) > Encoding: quoted-printable ------------------------------ Date: Mon, 29 May 2000 21:23:12 +0200 From: Martin Schmitt <[EMAIL PROTECTED]> Subject: Re: [PUG] Linux * Patrick Glanz ([EMAIL PROTECTED]) wrote/schrieb: > X-Mailer: Mozilla 4.72 [en] (Win98; I) > Erst mußt Du mal das Betriebssystem und die Mailingsoftware wechseln, > denn damit wird das mit Deiner Prüfung schon mal nix: Öchz... Wer im Glashaus sitzt, sollte sich besser im Dunklen umziehen... - -martin - -- Of all the things I've lost, I miss my mind the most. ------------------------------ Date: Mon, 29 May 2000 21:31:52 +0200 From: "Matthias A. Preikschat" <[EMAIL PROTECTED]> Subject: [PUG] Solaris This is a multi-part message in MIME format. - ------=_NextPart_000_0024_01BFC9B5.4E40DB00 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Moin,=20 m=F6chte jmd. ein Solaris haben. Wenn ja, bitte m=F6glichst frue = antworten, dann klappts auch mit dem brennen.... soweit matthias - ------=_NextPart_000_0024_01BFC9B5.4E40DB00 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=3D"text/html; charset=3Dwindows-1252" = http-equiv=3DContent-Type> <META content=3D"MSHTML 5.00.2314.1000" name=3DGENERATOR></HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2>Moin, </FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>m=F6chte jmd. ein Solaris haben. Wenn = ja, bitte=20 m=F6glichst frue antworten, dann klappts auch mit dem = brennen....</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>soweit</FONT></DIV> <DIV><FONT face=3DArial size=3D2>matthias</FONT></DIV></BODY></HTML> - ------=_NextPart_000_0024_01BFC9B5.4E40DB00-- ------------------------------ Date: Mon, 29 May 2000 22:03:41 +0200 (MEST) From: "Martin E. Alfke" <[EMAIL PROTECTED]> Subject: Re: [PUG] Solaris [Charset iso-8859-1 unsupported, filtering to ASCII...] > Moin, > > m_chte jmd. ein Solaris haben. Wenn ja, bitte m_glichst frue antworten, dann klappts >auch mit dem brennen.... > > soweit > matthias hoert sich nicht schlechtan, welches Solaris ist das denn? Solaris 7 oder 8 ? Martin - --- Martin Alfke ------------------------------ Date: Mon, 29 May 2000 22:00:54 +0200 From: "Matthias A. Preikschat" <[EMAIL PROTECTED]> Subject: Re: [PUG] Solaris - -----Ursprüngliche Nachricht----- Von: Martin E. Alfke <[EMAIL PROTECTED]> An: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Datum: Montag, 29. Mai 2000 21:52 Betreff: Re: [PUG] Solaris >[Charset iso-8859-1 unsupported, filtering to ASCII...] >> Moin, >> >> m_chte jmd. ein Solaris haben. Wenn ja, bitte m_glichst frue antworten, dann klappts auch mit dem brennen.... >> >> soweit >> matthias > >hoert sich nicht schlechtan, welches Solaris ist das denn? >Solaris 7 oder 8 ? ist 7. 8 sollte allerdnigs auch machbar sein, allerdings muss ich dazu meinen admin noch beknien... ;-) Matze ------------------------------ Date: Mon, 29 May 2000 22:21:54 +0200 (MEST) From: "Martin E. Alfke" <[EMAIL PROTECTED]> Subject: Solaris Booten (was Re: [PUG] Solaris) Solaris 7 for Intel hab ich schon hier. Das brauche ich nicht mehr. Mein einziges Problem ist momentan das booten: entweder muss ich dem Solaris beibringen, wie es Linux zu booten hat, oder der Lilo muss irgendwann mal verstehen, was er mit der Solaris Partition machen soll. Momentan funktioniert das nur, wenn ich jeweils die aktive Partition aendere. Hat da jemand einen Vorschlag? > > > > >hoert sich nicht schlechtan, welches Solaris ist das denn? > >Solaris 7 oder 8 ? > > > ist 7. 8 sollte allerdnigs auch machbar sein, allerdings muss ich dazu > meinen admin noch beknien... ;-) > > > Matze > > --------------------------------------------------------------------------- > PUG - Penguin User Group Wiesbaden - http://www.pug.org > > ------------------------------ Date: Mon, 29 May 2000 22:44:19 +0200 From: master of games <[EMAIL PROTECTED]> Subject: Re: Solaris Booten (was Re: [PUG] Solaris) "Martin E. Alfke" wrote: > > Solaris 7 for Intel hab ich schon hier. Das brauche ich nicht mehr. > > Mein einziges Problem ist momentan das booten: > > entweder muss ich dem Solaris beibringen, wie es Linux zu booten hat, oder der Lilo >muss irgendwann mal verstehen, was er mit der Solaris Partition machen soll. > Momentan funktioniert das nur, wenn ich jeweils die aktive Partition aendere. den bootblock der solarispartition mit dd kopieren bsp. dd if=/dev/sdg14 of=/boot/solaris-boot-block bs=512 count=1 danach im lilo eine konfiguration hinzufuegen ich bin mir nicht mehr sicher aber suche mal in der lilo manpage nach map damit kann man erstens den solaris bootblock laden und zweites so jedes betriebssystem starten das es gibt os/2, os/2 bootmanager, lilo, linux, beos, solaris, nt, 98, 95, dos, pts bootmanager ist damit getestet > > Hat da jemand einen Vorschlag? > > > > > > > > >hoert sich nicht schlechtan, welches Solaris ist das denn? > > >Solaris 7 oder 8 ? > > > > > > ist 7. 8 sollte allerdnigs auch machbar sein, allerdings muss ich dazu > > meinen admin noch beknien... ;-) solaris 8 ist frei liegt bei mir auf der arbeit will jemand ??? > > > > > > Matze ------------------------------ End of [EMAIL PROTECTED] - Digest V1 #2 ********************************** -------------------------------------------------------------------------- Digest von "[EMAIL PROTECTED]" - http://www.pug.org