hy
ich bin es nochmal :-[
ich habe nun die datei '/etc/isapnp.conf' erzeugt mit 'pnpdump >
/etc/isapnp.conf' soweit so gut (schlecht)
und sie bearbeitet (siehe anhang)
nun ist es aber leider so das ich mit 'cat /proc/interupts' keinen sym53c416
auf irq 12 endecken kann
meine frage: mu� ich den die /etc/isapnp.conf am anfang einlesen ??
und wenn ja wie bewerkstellige ich das?
--
Richard Stahl
Endlich Suse 8.0 Juhuuuuuu
# $Id: pnpdump_main.c,v 1.27 2001/04/30 21:54:53 fox Exp $
# Release isapnptools-1.26
#
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of the output file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DHAVE_PROC -DENABLE_PCI -DHAVE_SCHED_SETSCHEDULER
-DHAVE_NANOSLEEP -DWANT_TO_VALIDATE
#
# Trying port address 0273
# Board 1 has serial identifier 62 ff ff ff ff 61 41 89 4d
# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
# Card 1: (serial identifier 62 ff ff ff ff 61 41 89 4d)
# Vendor Id SLI4161, No Serial Number (-1), checksum 0x62.
# Version 1.0, Vendor version 0.1
# ANSI string -->SYM 53C416 <--
#
# Logical device id SLI4163
# Device supports I/O range check register
# Device supports vendor reserved register @ 0x38
# Device supports vendor reserved register @ 0x3a
# Device supports vendor reserved register @ 0x3b
# Device supports vendor reserved register @ 0x3d
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE SLI4161/-1 (LD 0
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0200
# Maximum IO base address 0xffe0
# IO base alignment 32 bytes
# Number of IO addresses required: 32
(IO 0 (SIZE 32) (BASE 0x0220) (CHECK))
# IRQ 4, 5, 7, 10, 11, 12 or 15.
# High true, edge sensitive interrupt
(INT 0 (IRQ 12 (MODE +E)))
(NAME "SLI4161/-1[0]{SYM 53C416 }")
(ACT Y)
))
# End tag... Checksum 0x00 (OK)
# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
CPU0
0: 429276 XT-PIC timer
1: 4056 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 2 XT-PIC rtc
9: 679 XT-PIC Ensoniq AudioPCI
10: 91625 XT-PIC eth0
14: 114647 XT-PIC ide0
15: 7 XT-PIC ide1
NMI: 0
ERR: 0
/lib/modules/2.4.18-4GB/kernel/drivers/scsi/sym53c416.o: invalid parameter parm_io
/lib/modules/2.4.18-4GB/kernel/drivers/scsi/sym53c416.o: insmod
/lib/modules/2.4.18-4GB/kernel/drivers/scsi/sym53c416.o failed
/lib/modules/2.4.18-4GB/kernel/drivers/scsi/sym53c416.o: Can't locate module 2
Jul 8 20:58:22 tux kernel: lp0: using parport0 (polling).
Jul 8 20:58:22 tux kernel: lp0: compatibility mode
Jul 8 20:58:25 tux /usr/sbin/cron[616]: (CRON) STARTUP (fork ok)
Jul 8 20:58:28 tux /etc/hotplug/net.agent[515]: No HW description found ... exiting
Jul 8 20:58:29 tux kernel: eth0: no IPv6 routers present
Jul 8 20:58:30 tux rpc.statd[730]: Version 0.3.3 Starting
Jul 8 20:58:30 tux kernel: Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
Jul 8 20:59:00 tux /USR/SBIN/CRON[866]: (root) CMD ( rm -f
/var/spool/cron/lastrun/cron.hourly)
Jul 8 21:04:17 tux kdm[848]: pam_unix2: session started for user richard, service xdm
Jul 8 21:18:09 tux -- MARK --
Jul 8 21:38:13 tux -- MARK --
Jul 8 21:58:16 tux -- MARK --
Jul 8 21:59:01 tux /USR/SBIN/CRON[1216]: (root) CMD ( rm -f
/var/spool/cron/lastrun/cron.hourly)
Jul 8 22:15:54 tux kernel: sym53c416.c: Version 1.0.0-ac
Jul 8 22:15:54 tux kernel: sym53c416: ISAPnP card found and configured at 0x220, IRQ
12.
Jul 8 22:15:54 tux kernel: No sym53c416 found at address 0x000
Jul 8 22:15:54 tux kernel: scsi0 : Symbios Logic 53c416 (rev. 151) at 0x220, irq 12,
SCSI-ID 7, fast pio
Jul 8 22:15:59 tux kernel: scsi : aborting command due to timeout : pid 0, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jul 8 22:16:05 tux kernel: scsi : aborting command due to timeout : pid 0, scsi0,
channel 0, id 0, lun 0 0x12 00 00 00 ff 00
Jul 8 22:16:05 tux kernel: SCSI host 0 abort (pid 0) timed out - resetting
Jul 8 22:16:05 tux kernel: SCSI bus is being reset for host 0 channel 0.
Jul 8 22:16:06 tux kernel: SCSI host 0 channel 0 reset (pid 0) timed out - trying
harder
Jul 8 22:16:06 tux kernel: SCSI bus is being reset for host 0 channel 0.
Jul 8 22:16:06 tux kernel: SCSI host 0 reset (pid 0) timed out again -
Jul 8 22:16:06 tux kernel: probably an unrecoverable SCSI bus or device hang.
