Mas Ari, saya udah setting semuanya seperti petunjuk yg ada, yg saya rubah hanya di /opt/ltsp/i386/etc/rc.d/floppyd, /dev/sdc1 saya ganti ama /dev/hda1, muncul pesan error di MToolsFM nya : This will display any errors or diagnostic from subprocesses Untuk remote hardisk udah bisa muncul, untuk floppy + usb/flash disk belum bisa muncul. Tolong pencerahannya,makasih banyak. > Danni wrote: > >>berikut settingan di lts.conf >> >>[Default] >> >> LOCAL_APPS = N >> VOLUME = 75 >> >>saya minta tolong dikoreksi dong kalo ada yang salah ato kurang. >> >>Makasih banyak semuanya. >> >>http://akbarnet.blogsome.com >> >> > tambahkan baris di lts.conf: > RCFILE_01 = floppyd > Ubah atau buat script startup floppyd, yang dilettakkan di > /opt/ltsp/i386/etc/rc.d > Isinya: > [EMAIL PROTECTED] rc.d]# cat floppyd > #!/bin/bash > # > # First, since floppyd runs as nobody, make /tmp world accessible. > # > chmod 777 /tmp > # > # Second, probe for the floppy & usb mass storage drivers > # > modprobe floppy > modprobe usb-storage > # > # Third, make the floppy world accessible. > # > chmod 666 /dev/floppy/0 > # > # creat a device file for USB floppies > # > if [ ! -b /dev/sdc1 ]; then > mknod /dev/sdc1 b 8 1 > fi > # > # and make it world accessible > # > chmod 666 /dev/sdc1 > # > # Finally, start floppyd. > # > # for regular floppies > floppyd -d /dev/floppy/0 > > # for USB keys > floppyd -l -s 5704 -d /dev/sdc1 > > > kemudian install program MToolsFM dari > http://core-coutainville.org/MToolsFM/ > ikuti petunjuk instalasinya > Ubah settingan di /etc/mtoolsfm.conf menjadi: > [EMAIL PROTECTED] ~]# cat /etc/mtoolsfm.conf > # MToolsFM config file. comments start with a hash sign. > # > # This variable sets the allowed driveletters (all lowercase). Example: > # DRIVES="ab" > DRIVES="au" > # > # This variable sets the driveletter upon startup in the left window. > # An empty string or space is for the hardisk. Example: > # LEFTDRIVE="a" > LEFTDRIVE="" > # > # This variable sets the driveletter upon startup in the right window. > # An empty string or space is for the hardisk. Example: > # RIGHTDRIVE="a" > RIGHTDRIVE="" > > ubah settingan /etc/mtoolsrc.ltsp > [EMAIL PROTECTED] ~]# cat /etc/mtoolsrc.ltsp > # Assign drive "a:" to floppy > drive a: file="$DISPLAY" mtools_skip_check=1 remote > # Assign drive "u:" to USB key > drive u: file="$DISPLAY/5704" mtools_skip_check=1 remote > > restart server LTSP. > > Semoga membantu.... > -singgahpai- > http://www.singgahpai.com > > -- > FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab > Unsubscribe: kirim email ke [EMAIL PROTECTED] > Arsip dan info milis selengkapnya di http://linux.or.id/milis > >
-- http://akbarnet.blogsome.com regards, Danni -- FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab Unsubscribe: kirim email ke [EMAIL PROTECTED] Arsip dan info milis selengkapnya di http://linux.or.id/milis