kalau
> anda mau pindahkan ke utp anda harus menggunakan utility program untuk
> 3c5x9 tsb kalau nggak salah namanya 3c5x9cfg.exe.
>
maaf, koreksi sedikit mas, file nya 3c509.exe bisa didapat di
http://pigtail.net/LRP/netcard.imz
tapi untuk jenis lan card tertentu.
udah bisa merubah ke UTP, hasil dmesg | less nya :
eth0 : 3c5x9 at 0x300, 10baseT port...
...
eth0 : setting 3c5x9/3c5x9B half duplex mode if -port:0, sw info : 1321
eth0 : setting Rx mode to 1 addresses
nah, trus aku jalankan : ip addr show, hasilnya :
....
3.eth0 : <broadcast, multicast, up>...
...
inet 10.216.63.29/29 brd 10.216.63.63 scope global eth0
aku ping ke 10.216.63.29 sudah bisa, tapi ketika ngeping ke ip yang
lain, misalnya 10.216.63.1 kok masih nggak bisa ya? errornya :
ping:send to: network is unreachable.
tambahan : ada pesen RTNETLINK answer : network is unreachable done...
apa karena ada error ini ya?
apa harus seting shorewall nya ya?
mohon pencerahannya, terima kasih.
salam,
popo
This e-mail message may contain legally privileged and/or confidential
information. If you are not the intended recipient(s), or the employee or agent
responsible for delivery of this message to the intended recipient(s), you are
hereby notified that any dissemination, distribution or copying of this e-mail
message is strictly prohibited. If you have received this message in error,
please immediately notify the sender and delete this e-mail message from your
computer.
--
FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab
Unsubscribe: kirim email ke [EMAIL PROTECTED]
Arsip dan info milis selengkapnya di http://linux.or.id/milis
