>-----Original Message----- >From: tukang ketik [mailto:[EMAIL PROTECTED] >Sent: Thursday, August 14, 2008 3:44 PM >To: tanya-jawab@linux.or.id >Subject: Re: [tanya-jawab] WvDial ==> Input/output error > > >sepertinya wvdialconf bisa hanya untuk modem yang langsung nyolok ke >usb, karena setiap aku jalanin selalu mencari ke >ttyS0, bagaimana >caranya agar ke rfcomm0 ? karena koneksi ku dari USB ke bluetooth >kemudian ke HP. > >Hasil errornya seperti ini : >============================= >[EMAIL PROTECTED]:~# wvdialconf /etc/wvdial.conf >Editing `/etc/wvdial.conf'. > >Scanning your serial ports for a modem. > >ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. >Modem Port Scan<*1>: S1 S2 S3 > > >Sorry, no modem was detected! Is it in use by another program? Did you >configure it properly with setserial? > >Please read the FAQ at http://open.nit.ca/wiki/?WvDial > >If you still have problems, send mail to <[EMAIL PROTECTED]>. >=======================
Biasanya error seperti itu aku cuekin. Trus edit secara manual file /etc/wvdial.conf Ganti bagian Modem = /dev/ttyS0 menjadi Modem = /dev/rfcomm0 Biasanya langsung bisa :-) --- ()'''''() (. 'o'.) =(,,)=(,,)= -- FAQ milis di http://wiki.linux.or.id/FAQ_milis_tanya-jawab Unsubscribe: kirim email ke [EMAIL PROTECTED] Arsip dan info milis selengkapnya di http://linux.or.id/milis
