Hello, Seeing Ian Pollards success I decided to follow his steps. Previously I had gone through the un install and reinstall process with no success. I had also been reluctant to use the restore as reports of errors with this have been reported but this was the only difference in approaches.
So,this time I deleted the TB application data, un installed and reinstalled back up to 4.0.14.3 but and used restore. Result - SSCE fully working as far as I can see with or without Hunspell.dll The restore failed with no url manager list and addresses history Initial difference in application directory was the new install had no cache dir. Clearly somewhere along the line the application data must have got corrupted to affect the SSCE engine. Thanks to Ian and Miguel for his help and patience in this but for TB programmers there must be an error which occurs under rare occasions causes this, but is there yet to be found and resolved. Best regards, Graham -- Graham Howe mail mailto:[EMAIL PROTECTED] Using TheBat 4.0.14.3 on Windows 5 SP2 ________________________________________________________ Current beta is 4.0.14.3 | 'Using TBBETA' information: http://www.silverstones.com/thebat/TBUDLInfo.html