Tcpreplay community,
I am already successfully using tcpreplay for my testing activities.
Our setup is rather simple with a Linux server (typically Redhat EL5)
connected directly via 1000 B/T to the system under test. The linux
server uses tcpreplay (presently v3.2.5, but we could/will upgrade to
v3.3.x) to send previous captured data streams to the system under
test. There is no need for tcprewrite or the other tools in the
tcpreplay suite as the tcpreplay box is simulating a mirror port or a
tap.
We are trying to enhance our testing by increasing amount of data and
the data rate. The data was captured at roughly 350 Mbps over 3 hours
for 450 Gbytes/1e9 packets.
Has anyone built or bought a box that handles this data rate and
volume? Any suggestions or comments would be welcome.
Bill Cobau
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Tcpreplay-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tcpreplay-users
Support Information: http://tcpreplay.synfin.net/trac/wiki/Support
