Yes. But that was not the problem. I ended up removing the Acronis
partition and then imaging as a single partition. Still had a problem.
The issue was a permissions issue on the server. To make a long - very
long - story short, suffice it to say that you should not use same name
for the image file as you do for the image.
Lesson learned...........
The image is being deployed to the first workstation now. If this works
- which it will - I will be deploying many, many more in the next few days.
As the song goes, "The first cut is the deepest.".
Scott Williams wrote:
Jim,
Did you try the Multi partition Option before going with raw?
*Multiple Partition - Single Disk* - Single Disk will back up all the
supported partitions on the first disk drive detected by FOG, but the
partitions are NOT resizable by FOG. This means that the image must be
restored to a disk of the same or larger capacity. It is possible to
backup NTFS drives with vendor specific 'restore' partitions with this
type of image.
Scott
JimHays wrote:
I am creating an image of a machine with FOG. I am forced to use a raw
image because the original was images from Acronis and has two different
partitions. The image says it has started but there is no screen
activity to give progress. Is there any way to know that the image is
really being created?
_______________________________________________
Tech-geeks mailing list
Tech-geeks@tech-geeks.org
http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
--
Scott R. Williams
Fisher School District
801 S . 5th St.
Fisher, Il 61843
------------------------------------------------------------------------
_______________________________________________
Tech-geeks mailing list
Tech-geeks@tech-geeks.org
http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
_______________________________________________
Tech-geeks mailing list
Tech-geeks@tech-geeks.org
http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
