Not here. I started 8 computers in a task for deployment and walked
away. Came back several hours later. The computers were finished with
the deployment and had rebooted but the hostnames were not changed. I
do have that it turned on. I tried looking at the online manual but
there was nothing.
On each of my hosts on the server's host list there is a red exclamation
point - Unable to resolve hostname MMS-GOLD-01.
Any ideas?
Thanks.
Scott Williams wrote:
First make sure it's enabled in the Fog Services on the server. You
probably did that.
Next, be patient, What I saw while imaging is that the client will
go through a couple reboots immediately after it gets an image.
It appears the dirty bit is turned on and it goes through a complete
chkdsk, reboots,
It then comes back up and if your lucky, you'll see a small dialogue
box come up saying it's going to change the hostname., reboots, then
I think it will come up cleanly with the specified hostnames.
This is what I've seen happen.
Scott
JimHays wrote:
Does anyone have any experience with the hostname changer in FOG? I
have re-imaged a lab but the hostnames are not being changed.
Any advice would be appreciated.
TIA
_______________________________________________
Tech-geeks mailing list
[email protected]
http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
--
Scott R. Williams
Fisher School District
801 S . 5th St.
Fisher, Il 61843
------------------------------------------------------------------------
_______________________________________________
Tech-geeks mailing list
[email protected]
http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
_______________________________________________
Tech-geeks mailing list
[email protected]
http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
