Unfortunately the autonomous bridges are still a bit of a plug and
pray technology for me, but in the past this document has helped me.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml

Before you go too far, I would suggest backing up the original configs
just in case.

On Thu, Jul 15, 2010 at 9:04 AM, Scott Oyer <[email protected]> wrote:
> Good morning fellow Geeks...
>
> Here is what I have going on this morning...
>
> We are hooking up our new building and grounds building via Cisco 1400
> bridges. Line of sight is great and the buildings are only about 200' apart
> (best guess anyway).
>
> The bridges were configured by an outside vendor (ouch) who could not even
> follow written instructions.
>
> High School hardware/Config
>
> Cisco 6513 Core switch
>
>        Vlan 213 B&G_MGMT 10.10.213.5/24
>
>        Trunk to MDF that the bridge is connected VLAN 213 is allowed
>
> Cisco 3560 POE switch
>
>       Vlan 213 10.10.213.4/24
>
>       Directly connected to port 48, set up as a trunk port allowing data,
> voip and 213 mgmt vlan.
>
> B&G
>
> Cisco 3560 POE switch
>
>       Vlan 213 10.10.213.1/24
>
>       Directly connected to port 48, set up as a trunk port allowing data,
> voip and 213 mgmt vlan.
>
> I had to change the IP numbers on the bridge's to as follows:
>
> HS bridge
>
>      10.10.213.2/24
>
> B&G bridge
>
>      10.10.213.3/24
>
> But the bridge are currently setup backwards as far as root and non-root
> bridge which I will have to change.
>
> If I plug my laptop directly into the bridge (via the power injector) I can
> telnet and http into both bridges via IP. What I can't do is telnet, ping,
> or http into the HS bridge when it is plugged into the switch. I can ping
> and telnet to the 213 vlan ip on the switch.
>
> Also, since I am trunking the vlan across the bridge's does the 213 vlan
> need to be setup on the bridges themselves??
>
> Need to get this operational today....you know how that goes...
>
> Thanks.
>
> Scott Oyer
>
>
> _______________________________________________
> Tech-geeks mailing list
> [email protected]
> http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks
>
>



-- 
--
Ben Story
CCSP, CCNA, CCNA Wireless, CCDA
[email protected]

"You cannot escape the responsibility of tomorrow by evading it today.
-- Abraham Lincoln
_______________________________________________
Tech-geeks mailing list
[email protected]
http://lists.illinicloud.org/cgi-bin/mailman/listinfo/tech-geeks

Reply via email to