We had this issue with Epson 84 projectors, too. We found that adjusting the resolution made a difference. The optimal resolution for the projector seemed to be 1024 x 768.
Tamara Pirmann Technology Education Whiteside School District 115 Belleville, IL 618-239-0000 ext. 2254 -----Original Message----- From: [email protected] [mailto:[email protected]]on Behalf Of [email protected] Sent: Tuesday, September 28, 2010 1:48 PM To: [email protected] Subject: Re: [tech-geeks] SMART board/Epson projector issue Robin, It's worth a try! Tammy Tammy McLane Technology Coordinator Argenta-Oreana Middle/High School 200 E. East St. Argenta, IL 62501 phone: 217-795-2163 x.1326 fax: 217-795-4502 Quoting Robin Huggins <[email protected]>: > I know that this sounds strange, but your may try to change the default > printer to a network printer instead of a local printer. I had to do this > on one teacher's machine. Her PowerPoints were being cut off, but I think > it was on her computer screen, also. > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of > [email protected] > Sent: Tuesday, September 28, 2010 12:35 PM > To: [email protected] > Subject: [tech-geeks] SMART board/Epson projector issue > > One of our teachers is projecting a powerpoint presentation on her > SMART board with an Epson 400W LCD projector but the top 1/6 of the > display is a black bar. The powerpoint slide looks fine on her > computer monitor. When she tries to orient the board, she cannot see > the top three points to tap. I have not run into this issue before. > Hoping one of you have a quick fix for me. ;) > TIA, > Tammy > > Tammy McLane > Technology Coordinator > Argenta-Oreana Middle/High School > 200 E. East St. > Argenta, IL 62501 > phone: 217-795-2163 x.1326 > fax: 217-795-4502 > > > > > > > > | Subscription info at http://www.tech-geeks.org | > > > | Subscription info at http://www.tech-geeks.org | > | Subscription info at http://www.tech-geeks.org | | Subscription info at http://www.tech-geeks.org |
