hello. A couple of thoughts: 1. Revision 1.14.14.2 of mpt_netbsd.c does contain Michael's fixes and is the version I started with when I began my work on improving the robustness of the driver.
2. I'm not sure the error you're getting is related to the problem Michael fixed. I believe you're getting an XS_RESOURCE_SHORTAGE status sent back to you from the driver at the scsipi layer. Michael's fix addresses a queue full event from the IOC firmware of the LSI card itself. It's not clear to me that the driver does anything but print a message when the firmware signals this condition. The mpt(4) driver returns XS_RESOURCE_SHORTAGE when the IOC returns an INSuFFiCIENT_RESOURCES error code, which seems to be different from a QUEUE_FULL event from the LSI firmware's perspective. It also returns this error when there is a memory allocation error in the driver. I guess it would be helpful to find out where this error is coming from; whether it's a direct result of the IOC signaling a problem or if there's a secondary memory allocation error in the driver itself. It looks like you have at least 255 request slots for the mpt(4)'s request queue; I would be surprised if you're running out of those, but who knows? -Brian On Mar 6, 1:25am, Mouse wrote: } Subject: Re: "adapter resource shortage"? } >> sd1(mpt0:0:1:0): adapter resource shortage } } > This could be caused by the driver not reserving enough command slots } > for its internal use. I committed a fix to reduce the maximum } > commands the scsipi layer would try to use (rev 1.17 of } > src/sys/dev/ic/mpt_netbsd.c, which should be in the 5.2 branch). } } I have mpt_netbsd.c 1.14.14.2; getting cvsweb to cough up diffs from } 1.16 to 1.17 of mpt_netbsd.c and comparing them against 1.14.14.2 makes } me think I do have that delta. } } > You might want to try reducing the scsipi openings a couple more and } > see if that helps. } } That is, s/2/5/ or some such on the } } adapt->adapt_openings = maxq - 2; /* Reserve 2 for driver use*/ } adapt->adapt_max_periph = maxq - 2; } } lines, right? (I'd want to check that maxq is at least 6 first....) } } I'll try that. } } Mouse >-- End of excerpt from Mouse
