On Tue, 16 Feb 2016, Edgar Fu? wrote:
Is this a continuation of your prior thread:
http://mail-index.netbsd.org/tech-userlevel/2016/01/30/msg009639.html ?
No. That was about a 54 degC CritMax for CPU Temp.
If so, what you're effectively asking is for
http://bxr.su/n/sys/dev/i2c/dbcool.c#dbcool_get_temp_limits to stop
reading the limits from the chip, which I don't think is supported.
It doesn't report any limit for sensor0 (l_temp), so there must be a way of
having "no limit".
It is possible to have "no limit". However, if the BIOS (or the sensor
itself) establishes a limit, it cannot be removed. It can only be
modified.
The "envstat -S" command can be used to reset a sensor's limits to the
state they were in at boot-time. For sensors which do not have any
initial limit, this command will remove any user-specified limits. For
chips which have initial limits, those initial limits are restored.
I'm curious why any adverse action was taken when triggering the
critical-minimum alarm. /etc/powerd/scripts/temperature_sensor seems to
indicate the action should be a simple syslog message:
critical-under)
logger -p warning "${0}: ($1) dropped below critical limit [${3}]" >&1
exit 0
;;
+------------------+--------------------------+------------------------+
| Paul Goyette | PGP Key fingerprint: | E-mail addresses: |
| (Retired) | FA29 0E3B 35AF E8AE 6651 | paul at whooppee.com |
| Kernel Developer | 0786 F758 55DE 53BA 7731 | pgoyette at netbsd.org |
+------------------+--------------------------+------------------------+