Still some problems..
System is uppdated to current..
Hangs at " bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02,
BCM5754/5787 A2 (0xb002)"
Anybody have any ideas ? otherwise I will have to send the machine back..
"
>> OpenBSD/i386 BOOT 3.02...........
boot>
booting hd0a:/bsd: 24491124+1053776 [52+344688+327471]=0x1900c0c
entry point at 0x200120
[ using 672584 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.6-current (GENERIC) #0: Tue Oct 6 21:55:29 CEST 2009
dr...@probec.islan.lab:/opt/flash/flashboot/obj/GENERIC
cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX
,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2,xTPR
real mem = 519663616 (495MB)
avail mem = 477478912 (455MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/27/08, BIOS32 rev. 0 @ 0xfb5c0,
SMBIOS rev. 2.3 @ 0xf0800 (33 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 05/27/2008
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xdc04
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfda50/416 (24 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 25 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 7 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xf200 0xd0000/0x8000!
cpu0 at mainbus0: (uniprocessor)
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 998 MHz: speeds: 1333, 1067 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xd0000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 15 function 0 vendor "VIA", unknown product 0x5287 rev
0x07: DMA (unsupported), channel 0 configured to compatibility, channel 1
configured to compatibility
pciide0: channel 0 ignored (not responding; disabled or no drives?)
wd0 at pciide0 channel 1 drive 0: <SanDisk SDCFH-002G>
wd0: 1-sector PIO, LBA, 1918MB, 3928176 sectors
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x91: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x91: irq 7
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x91: irq 10
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x91: irq 5
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8251 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL3 SO-DIMM
pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
ppb1 at pci0 dev 19 function 0 "VIA VT8251 PCIE" rev 0x00
pci2 at ppb1 bus 128
bridge io address conflict 0xc000/0x1000
bridge mem address conflict 0xcfb00000/0x100000
bridge mem address conflict 0xcfe00000/0x100000
bridge io address conflict 0xb000/0x1000
bridge mem address conflict 0xcfd00000/0x100000
bridge mem address conflict 0xcfc00000/0x100000
ppb2 at pci2 dev 0 function 0 "VIA VT8251 PCIE" rev 0x00: irq 5
pci3 at ppb2 bus 129
bge0 at pci3 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787 A2
(0xb002)
Hangs here..
"
Mvh
Daniel Rapp
Incabus Systems AB
Vdxel: + 46 8 556 964 60
http://www.incabus.com
-----Original Message-----
From: owner-t...@openbsd.org [mailto:owner-t...@openbsd.org] On Behalf Of Mark
Kettenis
Sent: den 5 oktober 2009 14:21
To: Daniel Rapp
Cc: tech@openbsd.org
Subject: Re: FW: Broadcom BCM5787
> Date: Mon, 5 Oct 2009 14:03:08 +0200
> From: "Daniel Rapp" <daniel.r...@incabus.com>
>
> Hi, Here are the dmesg and pcidump -v
>
> I have asked the developers and they are positive ther is two gigabit
> network ports with BCM5787 chipset on there, there are also two 10/100
> ports with the BCM4401 and those are found..
...
> pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
> pchb7 at pci0 dev 19 function 0 "VIA VT8251 PCIE" rev 0x00
Ah, a VIA VT8251 chipset. This should be fixed in -current.
