On Fri, 19 Mar 2010 19:50:58 -0400
Brad <b...@comstyle.com> wrote:
> Please test the following diff with any bge(4) adapters..
>
> Just check that things run as usual.
>
> Please provide me with a dmesg.
>
>
> Have bge_start check if there are less than 16 free send BDs and if not
> set IFF_OACTIVE and try again later. Previously bge(4) reserved 16 send
> BDs after loading DMA maps but the hardware only requires one reserved
> send BD.
>
> >From FreeBSD
>
Well, for my bge(4) things run as usual.
OpenBSD 4.7-current (GENERIC.MP) #0: Sat Mar 20 02:06:43 CET 2010
d...@liltree.my.domain:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1062203392 (1012MB)
avail mem = 1022468096 (975MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0450 (77 entries)
bios0: vendor Dell Inc. version "2.6.1" date 12/06/2007
bios0: Dell Inc. OptiPlex 745
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET SLIC SSDT SSDT SSDT
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5)
PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz, 1860.88 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz, 1860.65 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 3 (PCI4)
acpiprt1 at acpi0: bus 1 (PCI2)
acpiprt2 at acpi0: bus -1 (PCI3)
acpiprt3 at acpi0: bus -1 (PCI1)
acpiprt4 at acpi0: bus 2 (PCI5)
acpiprt5 at acpi0: bus -1 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: VBTN
cpu0: Enhanced SpeedStep 1860 MHz: speeds: 1867, 1600 MHz
memory map conflict 0x3f603c00/0x9fc400
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82Q965 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82Q965 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 8 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82Q965 Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 8 int 16 (irq
11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 8 int 17 (irq
10)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 8 int 22 (irq
9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: apic 8 int
16 (irq 11)
azalia0: codecs: Analog Devices AD1983
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 8 int 16 (irq
11)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 8 int 16 (irq
11)
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5754" rev 0x02, BCM5754/5787 A2
(0xb002): apic 8 int 16 (irq 11), address 00:18:8b:69:fe:dd
brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 8 int 23 (irq
5)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 8 int 17 (irq
10)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 8 int 18 (irq
9)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 8 int 23 (irq
5)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 8 int 20 (irq 10) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD103UJ>
wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, DVD-ROM DDU810A, KD38> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 8 int 20
(irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pciide1 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 8 int 20 (irq 10) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 "PIXART USB OPTICAL MOUSE"
rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub6 port 2 configuration 1 interface 0 "Microsoft Natural\M-.
Ergonomic Keyboard 4000" rev 2.00/1.73 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub6 port 2 configuration 1 interface 1 "Microsoft Natural\M-.
Ergonomic Keyboard 4000" rev 2.00/1.73 addr 2
uhidev2: iclass 3/0, 1 report id
uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
uhidev3 at uhub2 port 2 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/27.30 addr 3
uhidev3: iclass 3/1
ums1 at uhidev3: 8 buttons, Z dir
wsmouse1 at ums1 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
scsibus2 at softraid0: 1 targets
sd0 at scsibus2 targ 0 lun 0: <OPENBSD, SR CRYPTO, 003> SCSI2 0/direct fixed
sd0: 307199MB, 512 bytes/sec, 629145521 sec total
