On 2010-07-09 14:01:41, Christopher Zimmermann wrote: > On 07/09/10 14:19, Christopher Zimmermann wrote: > > Hi, > > > > I just upgraded to the very latest snapshot(9.7. 1:50) on i386. Now my > > system does not boot anymore. The only thing I get is: > > > > Using drive 0, partition 3. > > Loading... > > [cursor sits here] > > > > As I understand the boot process, the PBR boot loader has found /boot, > > verified the magic number and handed control over to the code loaded > > from /boot. > > > > I already booted the latest bsd.rd via pxeboot and did the following: > > > > # fdisk -u wd0 > > # mount /dev/wd0a /mnt > > # /mnt/mdec/installboot -v /mnt/boot /usr/mdev/biosboot wd0 > > > > this did not change anything. Same symptoms as before. Next thing I'll > > try is to boot normal bsd kernel via pxeboot and do installboot again > > from there. > > ok. Booting via pxeboot still works with > > boot hd0a:/bsd > > running installboot from there didn't help either. > > Next thing I tried was a complete reinstall of the latest snapshot on an > alternate root via pxeboot. > Install worked find, booting from harddist still doesn't work. pxeboot > works fine. > > There is something broken in latest snapshots /boot for sure. The system > is a ThinkPad T43p. I don't have a dmesg to provide at hand, sorry. >
I see this on my laptop too. Building /boot built from -current source and source from Jul 1 (before the last change to boot) yields the same result. Perhaps a gcc4 issue? OpenBSD 4.7-current (GENERIC) #14: Fri Jul 9 13:08:16 PDT 2010 jo...@flint.joshe.fake:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Celeron(R) M processor 1.40GHz ("GenuineIntel" 686-class) 1.40 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF real mem = 804540416 (767MB) avail mem = 781402112 (745MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 06/29/05, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf8cb0 (61 entries) bios0: vendor Dell Computer Corporation version "A17" date 06/29/2005 bios0: Dell Computer Corporation Inspiron 600m acpi0 at bios0: rev 0 acpi0: tables DSDT FACP acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) USB0(S1) USB1(S1) USB2(S1) USB3(S1) MODM(S3) PCIE(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits \\_SB_.PCI0 post-crs: 0 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (AGP_) acpiprt2 at acpi0: bus 2 (PCIE) acpicpu0 at acpi0acpicpu0: struck PSS entry, core frequency equals last acpicpu0: struck PSS entry, core frequency equals last acpicpu0: struck PSS entry, core frequency equals last acpicpu0: struck PSS entry, core frequency equals last acpicpu0: struck PSS entry, core frequency equals last acpicpu0: struck PSS entry, core frequency equals last acpicpu0: struck PSS entry, core frequency equals last acpicpu0: struck PSS entry, core frequency equals last acpicpu0: invalid _PSS length : C3, C3, C2, C1 acpitz0 at acpi0: critical temperature 102 degC acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 model "DELL Y13385" serial 4344 type LION oem "Sanyo" acpibat1 at acpi0: BAT1 not present acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PBTN acpibtn2 at acpi0: SBTN acpidock0 at acpi0: GDCK not docked (0) acpivideo0 at acpi0: VID_ acpivout0 at acpivideo0: TV__ acpivout1 at acpivideo0: CRT_ acpivout2 at acpivideo0: CRT2 acpivout3 at acpivideo0: LCD_ acpivout4 at acpivideo0: DVI_ bios0: ROM list: 0xc0000/0x10000 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03 intelagp0 at pchb0 agp0 at intelagp0: aperture at 0xe0000000, size 0x8000000 ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M9" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: irq 11 drm0 at radeondrm0 uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11 uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11 ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 pci2 at ppb1 bus 2 bce0 at pci2 dev 0 function 0 "Broadcom BCM4401B1" rev 0x02: irq 11, address 00:14:22:b8:c3:99 bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0 cbb0 at pci2 dev 1 function 0 "O2 Micro OZ711EC1 SmartCardBus" rev 0x20: irq 11, CardBus support disabled cbb1 at pci2 dev 1 function 1 "O2 Micro OZ711EC1 SmartCardBus" rev 0x20: irq 11, CardBus support disabled ath0 at pci2 dev 3 function 0 "Atheros AR5212 (IBM MiniPCI)" rev 0x01: irq 11 ath0: AR5213A 5.9 phy 4.3 rf5112a 3.6, WOR01W, address 00:0e:9b:89:d7:ca cardslot0 at cbb0 slot 0 flags 0 pcmcia0 at cardslot0 cardslot1 at cbb1 slot 1 flags 0 pcmcia1 at cardslot1 ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01 pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8032GAX> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDRW/DVD TSL462C, DE01> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4 AC97 ac97: codec id 0x83847652 (SigmaTel STAC9752/53) ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D audio0 at auich0 "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 biomask ed6d netmask ed6d ttymask ffff mtrr: Pentium Pro MTRR support vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b