[email protected] (Jonathan Gray), 2010.11.29 (Mon) 23:20 (CET): > On Mon, Nov 29, 2010 at 05:25:38PM +0100, MERIGHI Marcus wrote: > > disclaimer: David Coppa told me to post this to tech@ so this is not a > > case of cross posting. > > > > bought a ZTE MF112 today for my girlfriends ms win notebook. Took the > > chance to test it on OpenBSD. > > Without the patches below the thingy attaches as umsm for a second, > > detaches and re-attaches as umass. > > After patching it attaches as umsm0, umsm1, umsm2, umsm3 and ucom0, > > ucom1, ucom2. > does it come back as the same id? the other ZTE devices apparently > come back differently.
since I'm not sure what your question is aiming at I did the attach and patch dance once more and saved "usbdevs -v": on a snapshot of today, ergo before patching: first: umsm0 attach port 2 addr 2: full speed, power 500 mA, config 1, ZTE WCDMA Technologies MSM(0x2000), ZTE,Incorporated(0x19d2), rev 0.00, iSerialNumber P671A2ZTED010000 umsm0 detach umass0 attach: port 2 addr 2: full speed, power 500 mA, config 1, ZTE WCDMA Technologies MSM(0x0117), ZTE,Incorporated(0x19d2), rev 0.00, iSerialNumber P671A2ZTED010000 after updating src to -current today and patching: umsm0 attach port 2 addr 2: full speed, power 500 mA, config 1, ZTE WCDMA Technologies MSM(0x2000), ZTE,Incorporated(0x19d2), rev 0.00, iSerialNumber P671A2ZTED010000 umsm0 detach umsm0 attach port 2 addr 2: full speed, power 500 mA, config 1, ZTE WCDMA Technologies MSM(0x0117), ZTE,Incorporated(0x19d2), rev 0.00, iSerialNumber P671A2ZTED010000 ucom0 attach umsm1 attach ucom1 attach umsm2 attach ucom2 attach umsm3 attach bye, marcus
