On 01/13/11 10:07, Jasper Lievisse Adriaanse wrote:
I noticed this difference in my dmesg:
--- dmesg.orig Thu Jan 13 09:06:09 2011
+++ dmesg Thu Jan 13 09:49:57 2011
[...]
@@ -84,6 +84,22 @@
re0 at pci6 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D
(0x2800), apic 4 int 18 (irq 10), address e0:cb:4e:53:bf:bb
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ahci1 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 22 (irq
11), AHCI 1.1
+ahci1: ccb in slot 1 errored
+ahci1: timed out 1, active 0, count 0
+ahci1: ccb in slot 1 errored
+ahci1: timed out 1, active 0, count 0
+ahci1: ccb in slot 1 errored
+ahci1: timed out 1, active 0, count 0
+ahci1: ccb in slot 1 errored
+ahci1: timed out 1, active 0, count 0
+ahci1: ccb in slot 1 errored
+ahci1: timed out 1, active 0, count 0
+ahci1: ccb in slot 1 errored
+ahci1: timed out 1, active 0, count 0
+ahci1: ccb in slot 1 errored
+ahci1: timed out 1, active 0, count 0
+ahci1: ccb in slot 1 errored
+ahci1: timed out 1, active 0, count 0
Hi
I get the same output here. It boots fine and seems to operate as
expected. Full dmesg below.
/Markus
OpenBSD 4.9-beta (GENERIC.MP) #780: Thu Jan 20 17:21:34 MST 2011
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1877540864 (1790MB)
avail mem = 1813532672 (1729MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f000 (53 entries)
bios0: vendor American Megatrends Inc. version "0606" date 04/14/2010
bios0: ASUSTeK Computer INC. M4A78LT-M-LE
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4)
ALAN(S4) PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) PS2M(S4)
PS2K(S4) UAR1(S4) P0PC(S4) UHC1(S4) UHC2(S4) UHC3(S4) USB4(S4) UHC5(S4)
UHC6(S4) UHC7(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II X3 435 Processor, 2900.58 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully
associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully
associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) II X3 435 Processor, 2900.22 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully
associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully
associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Athlon(tm) II X3 435 Processor, 2900.22 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully
associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully
associative
ioapic0 at mainbus0: apid 3 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus 2 (PCE6)
acpiprt6 at acpi0: bus 3 (P0PC)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
acpibtn0 at acpi0: PWRB
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 vendor "Asustek", unknown product 0x9602
rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 vendor "ATI", unknown product 0x9616 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00: apic 3 int 18
(irq 10)
pci2 at ppb1 bus 2
alc0 at pci2 dev 0 function 0 "Attansic Technology L1C" rev 0xc0: apic 3
int 18 (irq 10), address e0:cb:4e:00:8a:3c
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 3 int 22
(irq 11), AHCI 1.1
ahci0: ccb in slot 1 errored
ahci0: timed out 1, active 0, count 0
ahci0: ccb in slot 1 errored
ahci0: timed out 1, active 0, count 0
ahci0: ccb in slot 1 errored
ahci0: timed out 1, active 0, count 0
ahci0: ccb in slot 1 errored
ahci0: timed out 1, active 0, count 0
ahci0: ccb in slot 1 errored
ahci0: timed out 1, active 0, count 0
ahci0: ccb in slot 1 errored
ahci0: timed out 1, active 0, count 0
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD15EARS-00Z, 80.0> SCSI3
0/direct fixed
sd0: 1430799MB, 512 bytes/sec, 2930277168 sec total
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD15EARS-00Z, 80.0> SCSI3
0/direct fixed
sd1: 1430799MB, 512 bytes/sec, 2930277168 sec total
sd2 at scsibus0 targ 2 lun 0: <ATA, WDC WD15EARS-00Z, 80.0> SCSI3
0/direct fixed
sd2: 1430799MB, 512 bytes/sec, 2930277168 sec total
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 3 int 16
(irq 10), version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 3 int 16
(irq 10), version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 3 int 17
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 3 int 18
(irq 10), version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 3 int 18
(irq 10), version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 3 int 19
(irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI
iic0 at piixpm0
iic0: addr 0x20 01=11 02=28 04=00 05=00 06=00 07=00 09=00 0a=0f 0b=0f
0c=0f 0d=0f 0e=16 0f=92 10=00 11=00 12=00 13=00 14=00 15=0e 16=3d 17=9e
18=80 19=fb 1a=af 1b=a0 1c=b6 1d=80 1e=0c 1f=01 20=01 21=01 22=01 23=03
3e=bf b2=09 b3=27 b5=09 words 00=ff11 01=1128 02=28ff 03=ff00 04=0000
05=0000 06=0000 07=00ff
spdmem0 at iic0 addr 0x50: 1GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 1GB DDR3 SDRAM PC3-10600
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L120AVV207-1>
wd0: 16-sector PIO, LBA48, 117800MB, 241254720 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 3
int 16 (irq 10)
azalia0: codecs: VIA/0x0397
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
re0 at pci3 dev 7 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB
(0x1000), apic 3 int 21 (irq 10), address 00:08:a1:c5:1c:5e
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 3 int 18
(irq 10), version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8712F rev 8, EC port 0x290
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhub7 at uhub2 port 3 "Texas Instruments TUSB2046 hub" rev 1.10/1.25 addr 2
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech HID
compliant keyboard" rev 1.10/1.80 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 1 configuration 1 interface 1 "Logitech HID
compliant keyboard" rev 1.10/1.80 addr 3
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub7 port 2 configuration 1 interface 0 "Logitech USB
RECEIVER" rev 1.10/25.10 addr 4
uhidev2: iclass 3/1
ums0 at uhidev2: 16 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev3 at uhub7 port 3 configuration 1 interface 0 "Justcom Technology
USB KVM Switch" rev 1.10/1.00 addr 5
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 modifier keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev4 at uhub7 port 3 configuration 1 interface 1 "Justcom Technology
USB KVM Switch" rev 1.10/1.00 addr 5
uhidev4: iclass 3/1
ums1 at uhidev4: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
ugen0 at uhub3 port 1 "APC Back-UPS ES 700 FW:829.D3 .I USB FW:D3" rev
1.10/1.06 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 1 targets
sd3 at scsibus2 targ 0 lun 0: <OPENBSD, SR RAID 1, 004> SCSI2 0/direct fixed
sd3: 1430799MB, 512 bytes/sec, 2930276577 sec total
root on wd0a swap on wd0b dump on wd0b
