Hi,
I recently switched over to Lenovo X201 notebook, from my older X61s.
OpenBSD worked flawlessly when I switched the harddisks (cool!). I
recently updated the src, and rebuilt the kernel, userland, and
xenocara (okay, I do run -current, and know the implications :-)). I
am facing two issues:
(1) Wireless stopped working - it was working before I pulled in the
update sometime last week. The new if_iwn.c is v1.108 committed on
2011/01/09 by damien. The manpage suggested I should have v5.6
firmware, so I did that too - earlier version was 5.3. It still does
not work. I can scan and the network is detected fine, but it simply
does not get the IP address, and keeps on showing me the dots, and
blinking.
(2) When the screen blanks-out after no activity, upon resume the LCD
brightness has turned to full, and I have to tone it down to the
normal brightness. Same behavior repeats when I close the lid, and
re-open it.
I can provide any required additional details. Thanks.
-Amarendra
dmesg follows:
OpenBSD 4.9-beta (kernel) #9: Mon Jan 24 10:08:27 IST 2011
[email protected]:/home/amar/site-specific/builds/kernel
cpu0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,M
WAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES
real mem = 1998659584 (1906MB)
avail mem = 1955807232 (1865MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/26/10, BIOS32 rev. 0 @
0xfdbe0, SMBIOS rev. 2.6 @ 0xe0010 (78 entries)
bios0: vendor LENOVO version "6QET61WW (1.31 )" date 10/26/2010
bios0: LENOVO 3680LA2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET ASF! SLIC BOOT SSDT
TCPA SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP1(S4) EXP2(S4)
EXP3(S4) EXP4(S4) EXP5(S4) EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,M
WAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,M
WAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,M
WAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 13 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus 5 (EXP4)
acpiprt6 at acpi0: bus 2 (EXP5)
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpicpu2 at acpi0: C3, C1, PSS
acpicpu3 at acpi0: C3, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4835" serial 120 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK docked (15)
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000
0xdd000/0x3000! 0xe0000/0x10000
cpu0: Enhanced SpeedStep 2395 MHz: speeds: 2400, 2399, 2266, 2133,
1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Mobile HD graphics" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
"Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
"Intel 3400 KT" rev 0x06 at pci0 dev 22 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel 82577LM" rev 0x06: apic 1 int 20
(irq 11), address f0:de:f1:37:cc:84
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 1 int
23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: apic
1 int 17 (irq 11)
azalia0: codecs: Conexant/0x5069, Intel/0x2804, using Conexant/0x5069
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 1 int
20 (irq 11)
pci1 at ppb0 bus 13
ppb1 at pci0 dev 28 function 3 "Intel 3400 PCIE" rev 0x06: apic 1 int
23 (irq 11)
pci2 at ppb1 bus 5
ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: apic 1 int
20 (irq 11)
pci3 at ppb2 bus 2
iwn0 at pci3 dev 0 function 0 "Intel Centrino Advanced-N 6200" rev
0x35: apic 1 int 16 (irq 11), MIMO 2T2R, MoW, address
58:94:6b:91:87:38
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 1 int
19 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6
pci4 at ppb3 bus 14
pcib0 at pci0 dev 31 function 0 "Intel QM57 LPC" rev 0x06
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: apic 1 int
16 (irq 11), AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, HTS721010G9SA00, MCZI> SCSI3 0/direct fixed
sd0: 95396MB, 512 bytes/sec, 195371568 sec total
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GU40N, QX20> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 1
int 23 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3
uhub3 at uhub2 port 5 "vendor 0x17ef product 0x1005" rev 2.00/0.01 addr 4
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Microsoft Basic
Optical Mouse" rev 1.10/0.00 addr 5
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony
Electronics Co., Ltd. Integrated Camera" rev 2.00/23.45 addr 6
video0 at uvideo0
uhub4 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
iwn0: radio is disabled by hardware switch
iwn0: radio is disabled by hardware switch
iwn0: radio is disabled by hardware switch
iwn0: RF switch: radio disabled
iwn0: radio is disabled by hardware switch
iwn0: RF switch: radio disabled
