Hi Tech,
On 16 January 2012 21:28, Ishwor Gurung <ishwor.gur...@gmail.com> wrote:
[...]
> I'll be enabling the athn specific debug on my Atheros card and see
> what comes out of it.
>
> Hopefully, something will make sense :-)
>
> I'll also make sure I post the log here.
Here's the output of debug:
athn0: device timeout
athn0: begin active scan
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 11 mode 11g
athn0: received beacon from 00:26:f2:56:f8:c2 rssi 17 mode 11g
athn0: received beacon from c4:3d:c7:61:49:ba rssi 31 mode 11g
athn0: received beacon from 00:60:64:55:2c:08 rssi 41 mode 11g
athn0: received beacon from c4:3d:c7:61:49:ba rssi 32 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 12 mode 11g
athn0: received beacon from 00:60:64:55:2c:08 rssi 40 mode 11g
athn0: received beacon from 00:60:64:55:2c:08 rssi 41 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 13 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 14 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 1 mode 11g
athn0: received beacon from 08:76:ff:4e:bf:10 rssi 19 mode 11g
athn0: received beacon from 00:26:44:50:73:21 rssi 19 mode 11g
athn0: received beacon from 08:76:ff:4e:bf:10 rssi 19 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 2 mode 11g
athn0: received beacon from 00:26:44:50:73:21 rssi 18 mode 11g
athn0: received beacon from 08:76:ff:4e:bf:10 rssi 15 mode 11g
athn0: received beacon from 00:26:44:50:73:21 rssi 18 mode 11g
athn0: received beacon from 08:76:ff:4e:bf:10 rssi 14 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 3 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 4 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 5 mode 11g
athn0: received beacon from 94:44:52:4d:80:84 rssi 22 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 6 mode 11g
athn0: received beacon from 08:76:ff:45:46:3c rssi 16 mode 11g
athn0: received beacon from 94:44:52:4d:80:84 rssi 24 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 7 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 8 mode 11g
athn0: received probe_resp from c4:3d:c7:61:49:ba rssi 18 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 9 mode 11g
athn0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 10 mode 11g
athn0: received beacon from 00:60:64:55:2c:08 rssi 40 mode 11g
athn0: received beacon from 00:60:64:55:2c:08 rssi 38 mode 11g
athn0: received beacon from c4:3d:c7:61:49:ba rssi 33 mode 11g
athn0: received beacon from 00:1f:33:88:a6:da rssi 21 mode 11g
athn0: end active scan
athn0: sending auth to c4:3d:c7:61:49:ba on channel 10 mode 11g
athn0: received auth from c4:3d:c7:61:49:ba rssi 30 mode 11g
athn0: sending assoc_req to c4:3d:c7:61:49:ba on channel 10 mode 11g
athn0: received assoc_resp from c4:3d:c7:61:49:ba rssi 31 mode 11g
athn0: associated with c4:3d:c7:61:49:ba ssid "abs" channel 10 start
1Mb short preamble short slot time protection enabled
athn0: received msg 1/4 of the 4-way handshake from c4:3d:c7:61:49:ba
athn0: sending msg 2/4 of the 4-way handshake to c4:3d:c7:61:49:ba
athn0: received msg 3/4 of the 4-way handshake from c4:3d:c7:61:49:ba
athn0: sending msg 4/4 of the 4-way handshake to c4:3d:c7:61:49:ba
[~] $ ifconfig athn0
athn0: flags=8947<UP,BROADCAST,DEBUG,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 54:37:8f:20:83:ae
priority: 4
groups: wlan egress
media: IEEE802.11 autoselect (DS1 mode 11g)
status: active
ieee80211: nwid abs chan 10 bssid c4:3d:c7:61:49:ba 32dB
wpakey <not displayed> wpaprotos wpa2 wpaakms psk wpaciphers tkip
wpagroupcipher tkip
inet6 fe80::5637:8fff:fe20:83ae%athn0 prefixlen 64 scopeid 0x2
inet 10.1.1.2 netmask 0xffffff00 broadcast 10.1.1.255
I was expecting log entries prior to the device timeout (after
enabling driver-dependent debugging code) but it seems all I can see
is the wpa scan and associate after the reset.
Is this something I should be looking at by upgrading to -current / -stable ?
Thanks!
--
Best regards,
Ishwor
