This fixes iwn(4) for me too. Where previously I would get "iwn0:
fatal firmware error" I now get a working setup with:
iwn0 at pci1 dev 0 function 0 "Intel Centrino Advanced-N 6030" rev 0x34: msi,
MIMO 2T2R, MoW, address 88:53:2e:d9:dd:9d
Full dmesg (including a boot with the previous kernel and the error I
got) included at the end of this mail.
Thanks Joshua and James, that fixes one of the remaining issues on my
laptop. This e-mail sent via that iwn(4) ;)
Paul 'WEiRD' de Weerd
On Tue, Nov 13, 2012 at 09:02:24PM -0500, James Turner wrote:
| I was actually able to add support myself with the following diff.
|
| --
| James Turner
| ja...@calminferno.net
| Index: if_iwn.c
| ===================================================================
| RCS file: /cvs/src/sys/dev/pci/if_iwn.c,v
| retrieving revision 1.115
| diff -u -p if_iwn.c
| --- if_iwn.c 11 Nov 2012 20:45:31 -0000 1.115
| +++ if_iwn.c 14 Nov 2012 02:00:52 -0000
| @@ -639,7 +639,8 @@ iwn5000_attach(struct iwn_softc *sc, pci_product_id_t
| break;
| case IWN_HW_REV_TYPE_6005:
| sc->limits = &iwn6000_sensitivity_limits;
| - if (pid == PCI_PRODUCT_INTEL_WL_6235_1) {
| + if (pid == PCI_PRODUCT_INTEL_WL_6235_1 ||
| + pid == PCI_PRODUCT_INTEL_WL_6030_2) {
| sc->fwname = "iwn-6030";
|
| /* XXX: The 6235 generates a fatal firmware error when
|
OpenBSD 5.2-current (GENERIC.MP) #0: Sun Nov 11 22:19:14 CET 2012
we...@banana.alm.weirdnet.nl:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8501063680 (8107MB)
avail mem = 8252280832 (7869MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe6020 (18 entries)
bios0: vendor INSYDE version "R1010H5" date 07/28/2011
bios0: Sony Corporation VPCZ23C5E
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA ASF! HPET APIC MCFG SLIC WDAT SSDT BOOT SSDT ASPT
SSDT SSDT SSDT SSDT
acpi0: wakeup devices EHC1(S3) EHC2(S3) HDEF(S0) WLAN(S0) RP01(S0) RMSC(S0)
RP02(S0) NXUC(S3) RP03(S3) RLAN(S3) RP04(S3) RP07(S3) PEG0(S0) PEGP(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2794.10 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus 3 (RP02)
acpiprt3 at acpi0: bus 4 (RP03)
acpiprt4 at acpi0: bus 5 (RP04)
acpiprt5 at acpi0: bus 8 (RP07)
acpiprt6 at acpi0: bus -1 (PEG0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpicpu2 at acpi0: C3, C1, PSS
acpicpu3 at acpi0: C3, C1, PSS
acpitz0 at acpi0: critical temperature is 98 degC
acpibat0 at acpi0: BAT1 type Lion oem "Sony Corporation"
acpibat1 at acpi0: BAT2 type Lion oem "Sony Corporation"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: DD01
acpivideo1 at acpi0: DD02
acpivideo2 at acpi0: DD03
acpivideo3 at acpi0: DD04
acpivideo4 at acpi0: DD05
acpivideo5 at acpi0: DD06
acpivideo6 at acpi0: DD07
acpivideo7 at acpi0: DD08
acpivideo8 at acpi0: GFX0
acpivout0 at acpivideo8: DD02
cpu0: Enhanced SpeedStep 2794 MHz: speeds: 2801, 2800, 2400, 2200, 2000, 1800,
1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xa0000000, size 0x10000000
inteldrm0 at vga1: apic 0 int 16
drm0 at inteldrm0
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0275, Intel/0x2805, using Realtek/0x0275
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 2
iwn0 at pci1 dev 0 function 0 "Intel Centrino Advanced-N 6030" rev 0x34: msi,
MIMO 2T2R, MoW, address 88:53:2e:d9:dd:9d
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
"Realtek RTS5209 Card Reader" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 4
"NEC xHCI" rev 0x04 at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 5
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), apic 0 int 19, address 54:42:49:9b:1e:1a
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5
ppb4 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
pci5 at ppb4 bus 8
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 82081HBM RAID" rev 0x04: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZRPC128, CXM0> SCSI3 0/direct
fixed naa.50000f0043584d30
sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
sd1 at scsibus0 targ 1 lun 0: <ATA, SAMSUNG MZRPC128, CXM0> SCSI3 0/direct
fixed naa.50000f0043584d30
sd1: 61057MB, 512 bytes/sector, 125045424 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 0 int 22
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/25.01 addr 3
ugen1 at uhub2 port 2 "Intel product 0x0189" rev 2.00/69.19 addr 4
uvideo0 at uhub2 port 3 configuration 1 interface 0 "Ricoh Company Ltd. USB2.0
Camera" rev 2.00/1.36 addr 5
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (651cd7ae692477da.a) swap on sd0b dump on sd0b
iwn0: fatal firmware error
firmware error log:
error type = "UNKNOWN" (0x00001999)
program counter = 0x00013638
source line = 0x0000012F
error data = 0x0000000100000095
branch link = 0x0001362C0001362C
interrupt link = 0x0000C15E00000000
time = 28140
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=2 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=2
802.11 state 0
iwn0: crystal calibration failed
iwn0: could not initialize hardware
iwn0: fatal firmware error
firmware error log:
error type = "UNKNOWN" (0x00001999)
program counter = 0x00013638
source line = 0x0000012F
error data = 0x0000000100000095
branch link = 0x0001362C0001362C
interrupt link = 0x0000C15E00000000
time = 28141
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=2 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=2
802.11 state 0
iwn0: crystal calibration failed
iwn0: could not initialize hardware
iwn0: fatal firmware error
firmware error log:
error type = "UNKNOWN" (0x00001999)
program counter = 0x00013638
source line = 0x0000012F
error data = 0x0000000100000095
branch link = 0x0001362C0001362C
interrupt link = 0x0000C15E00000000
time = 28140
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=2 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=2
802.11 state 0
iwn0: crystal calibration failed
iwn0: could not initialize hardware
iwn0: fatal firmware error
firmware error log:
error type = "UNKNOWN" (0x00001999)
program counter = 0x00013638
source line = 0x0000012F
error data = 0x0000000100000095
branch link = 0x0001362C0001362C
interrupt link = 0x0000C15E00000000
time = 28138
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=2 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=2
802.11 state 0
iwn0: crystal calibration failed
iwn0: could not initialize hardware
iwn0: fatal firmware error
firmware error log:
error type = "UNKNOWN" (0x00001999)
program counter = 0x00013638
source line = 0x0000012F
error data = 0x0000000100000095
branch link = 0x0001362C0001362C
interrupt link = 0x0000C15E00000000
time = 28140
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=2 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=2
802.11 state 0
iwn0: crystal calibration failed
iwn0: could not initialize hardware
iwn0: fatal firmware error
firmware error log:
error type = "UNKNOWN" (0x00001999)
program counter = 0x00013638
source line = 0x0000012F
error data = 0x0000000100000095
branch link = 0x0001362C0001362C
interrupt link = 0x0000C15E00000000
time = 28139
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=2 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=2
802.11 state 0
iwn0: crystal calibration failed
iwn0: could not initialize hardware
iwn0: fatal firmware error
firmware error log:
error type = "UNKNOWN" (0x00001999)
program counter = 0x00013638
source line = 0x0000012F
error data = 0x0000000100000095
branch link = 0x0001362C0001362C
interrupt link = 0x0000C15E00000000
time = 28141
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=2 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=2
802.11 state 0
iwn0: crystal calibration failed
iwn0: could not initialize hardware
iwn0: fatal firmware error
firmware error log:
error type = "UNKNOWN" (0x00001999)
program counter = 0x00013638
source line = 0x0000012F
error data = 0x0000000100000095
branch link = 0x0001362C0001362C
interrupt link = 0x0000C15E00000000
time = 28141
driver status:
tx ring 0: qid=0 cur=0 queued=0
tx ring 1: qid=1 cur=0 queued=0
tx ring 2: qid=2 cur=0 queued=0
tx ring 3: qid=3 cur=0 queued=0
tx ring 4: qid=4 cur=2 queued=0
tx ring 5: qid=5 cur=0 queued=0
tx ring 6: qid=6 cur=0 queued=0
tx ring 7: qid=7 cur=0 queued=0
tx ring 8: qid=8 cur=0 queued=0
tx ring 9: qid=9 cur=0 queued=0
tx ring 10: qid=10 cur=0 queued=0
tx ring 11: qid=11 cur=0 queued=0
tx ring 12: qid=12 cur=0 queued=0
tx ring 13: qid=13 cur=0 queued=0
tx ring 14: qid=14 cur=0 queued=0
tx ring 15: qid=15 cur=0 queued=0
tx ring 16: qid=16 cur=0 queued=0
tx ring 17: qid=17 cur=0 queued=0
tx ring 18: qid=18 cur=0 queued=0
tx ring 19: qid=19 cur=0 queued=0
rx ring: cur=2
802.11 state 0
iwn0: crystal calibration failed
iwn0: could not initialize hardware
syncing disks... done
rebooting...
OpenBSD 5.2-current (GENERIC.MP) #1: Wed Nov 14 07:41:49 CET 2012
we...@banana.alm.weirdnet.nl:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8501063680 (8107MB)
avail mem = 8252280832 (7869MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe6020 (18 entries)
bios0: vendor INSYDE version "R1010H5" date 07/28/2011
bios0: Sony Corporation VPCZ23C5E
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA ASF! HPET APIC MCFG SLIC WDAT SSDT BOOT SSDT ASPT
SSDT SSDT SSDT SSDT
acpi0: wakeup devices EHC1(S3) EHC2(S3) HDEF(S0) WLAN(S0) RP01(S0) RMSC(S0)
RP02(S0) NXUC(S3) RP03(S3) RLAN(S3) RP04(S3) RP07(S3) PEG0(S0) PEGP(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2794.00 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.66 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus 3 (RP02)
acpiprt3 at acpi0: bus 4 (RP03)
acpiprt4 at acpi0: bus 5 (RP04)
acpiprt5 at acpi0: bus 8 (RP07)
acpiprt6 at acpi0: bus -1 (PEG0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpicpu2 at acpi0: C3, C1, PSS
acpicpu3 at acpi0: C3, C1, PSS
acpitz0 at acpi0: critical temperature is 98 degC
acpibat0 at acpi0: BAT1 type Lion oem "Sony Corporation"
acpibat1 at acpi0: BAT2 type Lion oem "Sony Corporation"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: DD01
acpivideo1 at acpi0: DD02
acpivideo2 at acpi0: DD03
acpivideo3 at acpi0: DD04
acpivideo4 at acpi0: DD05
acpivideo5 at acpi0: DD06
acpivideo6 at acpi0: DD07
acpivideo7 at acpi0: DD08
acpivideo8 at acpi0: GFX0
acpivout0 at acpivideo8: DD02
cpu0: Enhanced SpeedStep 2794 MHz: speeds: 2801, 2800, 2400, 2200, 2000, 1800,
1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xa0000000, size 0x10000000
inteldrm0 at vga1: apic 0 int 16
drm0 at inteldrm0
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0275, Intel/0x2805, using Realtek/0x0275
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 2
iwn0 at pci1 dev 0 function 0 "Intel Centrino Advanced-N 6030" rev 0x34: msi,
MIMO 2T2R, MoW, address 88:53:2e:d9:dd:9d
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
"Realtek RTS5209 Card Reader" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 4
"NEC xHCI" rev 0x04 at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 5
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), apic 0 int 19, address 54:42:49:9b:1e:1a
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5
ppb4 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
pci5 at ppb4 bus 8
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 82081HBM RAID" rev 0x04: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZRPC128, CXM0> SCSI3 0/direct
fixed naa.50000f0043584d30
sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
sd1 at scsibus0 targ 1 lun 0: <ATA, SAMSUNG MZRPC128, CXM0> SCSI3 0/direct
fixed naa.50000f0043584d30
sd1: 61057MB, 512 bytes/sector, 125045424 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 0 int 22
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/25.01 addr 3
ugen1 at uhub2 port 2 "Intel product 0x0189" rev 2.00/69.19 addr 4
uvideo0 at uhub2 port 3 configuration 1 interface 0 "Ricoh Company Ltd. USB2.0
Camera" rev 2.00/1.36 addr 5
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (651cd7ae692477da.a) swap on sd0b dump on sd0b
--
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
http://www.weirdnet.nl/
