On 2013/03/16 22:57, Vladimir Támara Patiño wrote: > In a firewall I was using for long time two cards RTL8169SC with 5.2 > on a board MSI M7312K9MM-V, today we changed the board to Asrock > H55M-LE ( http://www.asrock.com/mb/Intel/H55M-LE/?cat=Specifications > ), and > the network cards refused to work, re0 would generate during boot: > Mar 16 19:42:46 beth /bsd: re0: PHY write failed > Mar 16 19:42:46 beth /bsd: re0: reset never completed! > > I had two replace with two network cards with RTL8169S and RTL8169 > and with them everything is working right. > > In the moment I cannot reproduce the errors because the hardware is used > in production, but wanted to report.
There's little point in reporting unless you can include the relevant information. Selected quotes from http://www.openbsd.org/report.html :- "Always provide as much information as possible." "The OpenBSD kernel output. You can get this with the dmesg command, but it is possible that your dmesg output does not contain all the information that is captured in /var/run/dmesg.boot. If this is the case, include information from both. *Please include this in all bug reports.*" "Do not be afraid if your bug report becomes rather lengthy. That is a fact of life. It's better to report everything the first time than us having to squeeze the facts out of you."
