buglet 1: When booting and the screen goes to its 34 line 85 column mode the text mode fits into 30cm wide and 22cm high at the top left corner of a 38cm wide 30cm high screen.
X runs full screen. buglet 2: When capturing the dmesg into a file on a USB mem there was no white on blue notice telling me that sd0 had been inserted. Or removed 8-) Neither happens on an Intel 945GTP running the same snapshot. dmesg: OpenBSD 5.5-beta (GENERIC.MP) #233: Fri Feb 7 12:14:13 MST 2014 t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF real mem = 2137223168 (2038MB) avail mem = 2090381312 (1993MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 06/23/11, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.6 @ 0xfc8b0 (23 entries) bios0: vendor American Megatrends Inc. version "080015" date 06/23/2011 bios0: Standard XS35 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET GSCI acpi0: wakeup devices P0P1(S4) AZAL(S3) P0P4(S4) P0P5(S4) JLAN(S3) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) EUSB(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=64, max=64, C-substates=0.1.0.0.0, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 3, remapped to apid 4 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 3 (P0P1) acpiprt2 at acpi0: bus 1 (P0P4) acpiprt3 at acpi0: bus 2 (P0P5) acpiprt4 at acpi0: bus -1 (P0P6) acpiprt5 at acpi0: bus -1 (P0P7) acpiprt6 at acpi0: bus -1 (P0P8) acpiprt7 at acpi0: bus -1 (P0P9) acpiec0 at acpi0 acpicpu0 at acpi0 acpicpu1 at acpi0 acpicpu2 at acpi0 acpicpu3 at acpi0 acpitz0 at acpi0: critical temperature is 104 degC acpibtn0 at acpi0: SLPB acpibtn1 at acpi0: PWRB acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: LCD_ bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1800! 0xcf800/0x1000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) 0:31:2: mem address conflict 0xfc00/0x400 pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02 intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1024x768 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi azalia0: codecs: IDT 92HD81B1X audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17 pci2 at ppb1 bus 2 "JMicron SD/MMC" rev 0x80 at pci2 dev 0 function 0 not configured sdhc0 at pci2 dev 0 function 2 "JMicron SD Host Controller" rev 0x80: apic 4 int 18 sdmmc0 at sdhc0 "JMicron Memory Stick" rev 0x80 at pci2 dev 0 function 3 not configured jme0 at pci2 dev 0 function 5 "JMicron JMC250" rev 0x03: msi, address 80:ee:73:28:4b:69 jmphy0 at jme0 phy 1: JMP211 10/100/1000 PHY, rev. 1 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 23 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 19 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 16 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci3 at ppb2 bus 3 pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02 pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 4 int 19 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <WDC WD3200BEVT-00A23T0> wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW SN-208AB, TC00> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-12800 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x0b38 product 0x0010" rev 1.10/1.02 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 "vendor 0x0b38 product 0x0010" rev 1.10/1.02 addr 2 uhidev1: iclass 3/0, 2 report ids uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 uhidev2 at uhub3 port 2 configuration 1 interface 0 "Holtek product 0x1400" rev 1.10/1.43 addr 2 uhidev2: iclass 3/1 ukbd1 at uhidev2: 8 variable keys, 6 key codes wskbd2 at ukbd1 mux 1 wskbd2: connecting to wsdisplay0 uhidev3 at uhub3 port 2 configuration 1 interface 1 "Holtek product 0x1400" rev 1.10/1.43 addr 2 uhidev3: iclass 3/1, 3 report ids ums0 at uhidev3 reportid 1: 5 buttons, Z dir wsmouse0 at ums0 mux 0 uhid2 at uhidev3 reportid 2: input=3, output=0, feature=0 uhid3 at uhidev3 reportid 3: input=1, output=0, feature=0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (7b898b60f8465533.a) swap on wd0b dump on wd0b <EOF> *** NOTE *** Please DO NOT CC me. I <am> subscribed to the list. Mail to the sender address that does not originate at the list server is tarpitted. The reply-to: address is provided for those who feel compelled to reply off list. Thankyou. Rod/ --- This life is not the real thing. It is not even in Beta. If it was, then OpenBSD would already have a man page for it.