Hi,
Just ran into something strange. I was running 'sudo cdio cdrip'
and in another shell running a memory-hungry perl script, this
caused a bunch of processes to swap out (namely Xorg). Once
the cdrip was done, and I killed the perl script, and let the
system "calm down", I still noticed lag in moving the mouse
around in X. Looking at top, Xorg (and other processes, which
were swapped, ones that show 4K RES) seem to want to stay swapped.
Playing in X, trying to force it to unswap, I see its RES increase,
but once I leave it alone, I can see in top the its RES goes
down, until I start doing things in X. Same with other processes.
cu is at 4K RES ATM, If I start typing in its session, RES
goes up to 250K, then back down to 4K.
live example of this xterm I'm typing in:
13634 sidster 2 0 3120K 352K sleep select 0:02 0.00% xterm
stop typing and:
13634 sidster 2 0 3120K 4K sleep select 0:02 0.00% xterm
What other info can i provide that would be useful? Before
I reboot this box (cause I can't stand working like this)?
Cheers,
--patrick
$ sysctl kern.version
kern.version=OpenBSD 5.6-current (GENERIC) #345: Tue Sep 9 00:22:24 MDT 2014
t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
OpenBSD 5.6-current (GENERIC) #345: Tue Sep 9 00:22:24 MDT 2014
t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 520028160 (495MB)
avail mem = 497561600 (474MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0100 (43 entries)
bios0: vendor Award Software International, Inc. version "F9" date 05/11/2006
bios0: Gigabyte Technology Co., Ltd. GA-K8N-SLi / GA-K8N-SLi-RH
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP MCFG APIC
acpi0: wakeup devices HUB0(S5) XVR0(S5) XVR1(S5) XVR2(S5) XVR3(S5) USB0(S3)
USB2(S3) MMAC(S5) MMCI(S5) UAR1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xd0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 3200+, 2010.53 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 89 present, BIOS upgrade may be required
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 201MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (HUB0)
acpicpu0 at acpi0: PSS
acpibtn0 at acpi0: PWRB
cpu0: Cool'n'Quiet K8 2010 MHz: speeds: 2000 1000 MHz
pci0 at mainbus0 bus 0
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL3.0
iic1 at nviic0
iic1: addr 0x4e 01=06 02=10 03=72 05=80 06=0f 0a=ff 0e=e0 0f=ff words 00=00ff
01=06ff 02=10ff 03=72ff 04=00ff 05=80ff 06=0fff 07=00ff
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 2 int 10,
version 1.0, legacy support
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: apic 2 int 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: apic 2 int 5,
nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850 rev 0)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HDS722525VLAT80>
wd0: 16-sector PIO, LBA48, 238474MB, 488395055 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide1: using apic 2 int 11 for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GH24NS95, RN01> ATAPI 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide2: using apic 2 int 10 for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4" rev 0xa2
pci1 at ppb0 bus 1
dc0 at pci1 dev 7 function 0 "Lite-On PNIC" rev 0x20: apic 2 int 5, address
00:02:e3:07:cc:df
bmtphy0 at dc0 phy 1: BCM5201 10/100 PHY, rev. 2
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 2 int 11,
address 00:16:e6:82:17:da
ciphy0 at nfe0 phy 7: CS8201 10/100/1000TX PHY, rev. 3
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
radeondrm0 at pci5 dev 0 function 0 "ATI Radeon X300" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 10
"ATI Radeon X300 Sec" rev 0x00 at pci5 dev 0 function 1 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8712F rev 5, EC port 0x290
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
uhub2 at uhub0 port 5 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 2
uhub3 at uhub1 port 8 "Fujitsu Component product 0x100e" rev 2.00/1.03 addr 2
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Microsoft Microsoft
3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 4 configuration 1 interface 0 "Fujitsu Component Type 7
Keyboard" rev 2.00/1.03 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (63fc0d2826838f20.a) swap on wd0b dump on wd0b
drm: initializing kernel modesetting (RV380 0x1002:0x5B60 0x1043:0x0082).
radeondrm0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (128M used)
radeondrm0: GTT: 512M 0x00000000C0000000 - 0x00000000DFFFFFFF
drm: PCIE GART of 512M enabled (table at 0x00000000E0040000).
radeondrm0: 1600x1200
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
dc0: failed to force tx to idle state
