On 21 Sep 2014, at 4:26, Mark Kettenis <[email protected]> wrote:
> The diff below adds support for "physical disks" to mfii(4). Just
> like with mfi(4) you can configure this hardware (or at least some
> models) to expose disks that have not been assigned to a logical volume
> to the host. This diff makes those disks accesable from OpenBSD.
>
> I would appreciate some tests, especially from people who have
> configured some logical volumes on their hardware.
logical disks work fine with this diff. it reads fine to me too.
ok dlg@
tested on a dell perc h810:
OpenBSD 5.6-current (GENERIC.MP) #0: Tue Sep 30 17:40:19 AEST 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17158176768 (16363MB)
avail mem = 16692711424 (15919MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xbfb9c000 (67 entries)
bios0: vendor Dell Inc. version "2.6.1" date 04/20/2009
bios0: Dell Inc. PowerEdge 2950
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ TCPA
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, 2494.04 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.0, IBE
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, 2493.76 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF
cpu1: 6MB 64b/line 16-way L2 cache
cpu1: smt 0, core 0, package 1
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, 2493.76 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF
cpu2: 6MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, 2493.76 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF
cpu3: 6MB 64b/line 16-way L2 cache
cpu3: smt 0, core 2, package 1
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, 2493.75 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF
cpu4: 6MB 64b/line 16-way L2 cache
cpu4: smt 0, core 1, package 0
cpu5 at mainbus0: apid 5 (application processor)
cpu5: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, 2493.76 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF
cpu5: 6MB 64b/line 16-way L2 cache
cpu5: smt 0, core 1, package 1
cpu6 at mainbus0: apid 3 (application processor)
cpu6: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, 2493.76 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF
cpu6: 6MB 64b/line 16-way L2 cache
cpu6: smt 0, core 3, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, 2493.76 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF
cpu7: 6MB 64b/line 16-way L2 cache
cpu7: smt 0, core 3, package 1
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (PEX2)
acpiprt2 at acpi0: bus 5 (UPST)
acpiprt3 at acpi0: bus 6 (DWN1)
acpiprt4 at acpi0: bus 8 (DWN2)
acpiprt5 at acpi0: bus 1 (PEX3)
acpiprt6 at acpi0: bus -1 (PE2P)
acpiprt7 at acpi0: bus 10 (PEX4)
acpiprt8 at acpi0: bus 12 (PEX6)
acpiprt9 at acpi0: bus 2 (SBEX)
acpiprt10 at acpi0: bus 14 (COMP)
acpicpu0 at acpi0: C3
acpicpu1 at acpi0: C3
acpicpu2 at acpi0: C3
acpicpu3 at acpi0: C3
acpicpu4 at acpi0: C3
acpicpu5 at acpi0: C3
acpicpu6 at acpi0: C3
acpicpu7 at acpi0: C3
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 4
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 7
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 16
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: msi
pci5 at ppb4 bus 8
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 9
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
mfi0 at pci7 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04: apic 8 int 16
mfi0: "PERC 6/i Integrated", firmware 6.3.3.0002, 256MB cache
scsibus1 at mfi0: 64 targets
sd0 at scsibus1 targ 0 lun 0: <DELL, PERC 6/i, 1.22> SCSI3 0/direct fixed
naa.6001e4f019170b000f2142c304adc67a
sd0: 69376MB, 512 bytes/sector, 142082048 sectors
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x12: msi
pci8 at ppb7 bus 10
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci9 at ppb8 bus 11
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12: msi
pci10 at ppb9 bus 12
mfii0 at pci10 dev 0 function 0 "Symbios Logic MegaRAID SAS2208" rev 0x05: msi
mfii0: "PERC H810 Adapter", firmware 21.2.0-0007, 1024MB cache
scsibus2 at mfii0: 64 targets
sd1 at scsibus2 targ 0 lun 0: <DELL, PERC H810, 3.13> SCSI3 0/direct fixed
naa.6b8ca3a0f04ec3001bbd178006279b5f
sd1: 1907200MB, 512 bytes/sector, 3905945600 sectors
scsibus3 at mfii0: 256 targets
ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci12 at ppb11 bus 2
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 3
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int 16
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 8 int 21
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 8 int 20
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 8 int 21
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 8 int 20
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 8 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci14 at ppb13 bus 14
radeondrm0 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02
drm0 at radeondrm0
radeondrm0: apic 8 int 19
pcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus4 at atapiscsi0: 2 targets
cd0 at scsibus4 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCCT10N, A102> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub5 at uhub0 port 1 "Dell product 0xa001" rev 2.00/0.00 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Dell DRAC5" rev 1.10/0.00
addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Dell DRAC5" rev 1.10/0.00
addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
umass0 at uhub5 port 2 configuration 1 interface 0 "DELL INC. DRAC5 VIRTUAL
MEDIA" rev 2.00/0.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus5 at umass0: 2 targets, initiator 0
cd1 at scsibus5 targ 1 lun 0: <Dell, Virtual CDROM, 123> SCSI0 5/cdrom
removable serial.413c00011028_123456
umass1 at uhub5 port 2 configuration 1 interface 1 "DELL INC. DRAC5 VIRTUAL
MEDIA" rev 2.00/0.00 addr 4
umass1: using SCSI over Bulk-Only
scsibus6 at umass1: 2 targets, initiator 0
sd2 at scsibus6 targ 1 lun 0: <Dell, Virtual Floppy, 123> SCSI0 0/direct
removable serial.413c00011028_123456
uhub6 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 5
vscsi0 at root
scsibus7 at vscsi0: 256 targets
softraid0 at root
scsibus8 at softraid0: 256 targets
root on sd0a (7351281f2849e321.a) swap on sd0b dump on sd0b
bnx0: address 00:1e:4f:1b:26:53
brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx1: address 00:1e:4f:1b:26:51
brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
drm: initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x01B2).
radeondrm0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (16M used)
radeondrm0: GTT: 512M 0x00000000B8000000 - 0x00000000D7FFFFFF
drm: PCI GART of 512M enabled (table at 0x0000000002251000).
radeondrm0: 1280x1024
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
