Greeting dear Tech,
This is my first time posting in the OpenBSD mailing list so first I'd
like to thank every one who makes this great OS available to all of us (:
so thank you!
OpenBSD 5.7 on i386 machine.
Long story short: AR2413 device is not listed in ath(4) man page. I am
able to scan and find SOME network and connect to them, but not to others.
long story long: I got an old laptop to install and learn OpenBSD.
installed it via USB. when I do "ifconfig ath0 scan" I get some networks,
I tried it in a library and I was able to connect to an open network.
however, some networks are not showing by the scan at all (unlucky me it's
the one of the campus), and if I do, say, "ifconfig ath0 nwid
campus_network wpakey network_password up" and then "dhclient ath0" I get
"ath0: no link....... sleeping".
here's a copy of my dmesg.
------------------------------------dmesg---------------------------------
OpenBSD 5.7 (GENERIC) #738: Sun Mar 8 10:59:31 MDT 2015
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M CPU 440 @ 1.86GHz ("GenuineIntel" 686-class)
1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,SSE3,MWAIT,TM2,xTPR,PDCM,PERF
real mem = 1877024768 (1790MB)
avail mem = 1833996288 (1749MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 07/18/07, BIOS32 rev. 0 @ 0xfdbd0, SMBIOS rev. 2.4
@ 0xdc010 (29 entries)
bios0: vendor Phoenix Technologies LTD version "06YE" date 07/18/2007
bios0: SAMSUNG ELECTRONICS CO., LTD. R40P/R41P
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SLIC SSDT SSDT SSDT
acpi0: wakeup devices PWRB(S4) P2P_(S3) LANC(S3) AZLA(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-4
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P2P_)
acpiprt2 at acpi0: bus 1 (AGP_)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1
acpipwrres0 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 100 degC
acpitz1 at acpi0: critical temperature is 100 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 type LION oem "SAMSUNG Electronics"
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: ATIM
bios0: ROM list: 0xc0000/0xd800 0xdc000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x7930 rev
0x00
ppb0 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x7932 rev
0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon X1200" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 1 int 18
ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 1 int 22,
AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54161, SBDO> SCSI3 0/direct
fixed naa.5000cca543c95346
sd0: 114473MB, 512 bytes/sector, 234441648 sectors
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 1 int 16,
version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 1 int 17,
version 1.0, legacy support
ohci2 at pci0 dev 19 function 2 "ATI SB600 USB" rev 0x00: apic 1 int 18,
version 1.0, legacy support
ohci3 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 1 int 17,
version 1.0, legacy support
ohci4 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 1 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x14: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL6 SO-DIMM
pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <TSSTcorp, CD/DVDW TS-L632D, SC04> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 1
int 16
azalia0: codecs: AT&T/Lucent/0x1040, Realtek ALC262, using Realtek ALC262
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb1 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci2 at ppb1 bus 2
rl0 at pci2 dev 5 function 0 "Realtek 8139" rev 0x10: apic 1 int 23,
address 00:13:77:39:2c:42
rlphy0 at rl0 phy 0: RTL internal PHY
ath0 at pci2 dev 7 function 0 "Atheros AR2413" rev 0x01: apic 1 int 20
ath0: AR2413 7.8 phy 4.5 rf 5.6 eeprom 5.2, WOR5_ETSIC, address
00:1b:9e:06:89:df
cbb0 at pci2 dev 9 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 1 int
20
sdhc0 at pci2 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x18: apic 1 int
22
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x00 at pci2 dev 9 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x09 at pci2 dev 9 function 3 not
configured
"Ricoh 5C852 xD" rev 0x04 at pci2 dev 9 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci4: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (46c2ae6c34a358de.a) swap on sd0b dump on sd0b
error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load
firmware "radeon-rs600_cp"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
drm:pid0:rs600_startup *ERROR* failed initializing CP (-2).
drm:pid0:rs600_init *ERROR* Disabling GPU acceleration
drm:pid0:radeon_bo_unpin *WARNING* 0xd877d190 unpin not necessary
radeondrm0: 1280x800
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using
wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
---------------------------------dmesg---------------------------------
The network is encrypted with WPA2-PSK. I did everything asked by the
community to try at #OpenBSD. in the end they told me to post it here.
If there's anything I can do for help, I'll be happy (:
Thanks in advance!
--
Antranig Vartanian
http://antranig.pingvinashen.am/
