I didn't get any response the first time I posted about this... Can somebody
at least point me in the direction of something equivillent to pcidump/usbdevs,
for cardbus devices, so I can try to identify this mystery ethernet controller?
cbb0 at pci1 dev 9 function 0 "ENE CB-1410 CardBus" rev 0x01: apic 1 int 22,
CardBus support disabled
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
The host interface attaches, but my understanding is that the CardBus support
disabled message means that no driver attached to the connected device. Or am
I wrong?
OpenBSD 5.8 (GENERIC) #0: Sat Nov 21 14:48:14 GMT 2015
r...@saturn.lan:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.50GHz ("GenuineIntel" 686-class) 1.50
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF
real mem = 1600536576 (1526MB)
avail mem = 1557299200 (1485MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 02/07/06, BIOS32 rev. 0 @ 0xfd4b0, SMBIOS rev. 2.31 @
0xdc010 (32 entries)
bios0: vendor Phoenix Technologies LTD version "V1.09" date 02/07/2006
bios0: Acer Aspire3610
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC BOOT MCFG SSDT SSDT
acpi0: wakeup devices LID0(S3) SLPB(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB7(S3) LANB(S5) MODM(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 6 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: !C3(250@85 io@0x1015), !C2(500@1 io@0x1014), C1(1000@1 halt)
acpitz0 at acpi0: critical temperature is 100 degC
acpitz1 at acpi0: critical temperature is 70 degC
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "Bat 8Cell" serial 32281 type LION oem "ace"
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: GFX0
bios0: ROM list: 0xc0000/0xf200! 0xdc000/0x4000! 0xe0000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
drm: fixme: max PWM is zero
inteldrm0: 1280x800
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 17
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci1 at ppb0 bus 6
ath0 at pci1 dev 5 function 0 "Atheros AR2413" rev 0x01: apic 1 int 21
ath0: AR2413 7.8 phy 4.5 rf 5.6 eeprom 5.2, WOR3W, address 00:14:a4:85:f1:bf
rl0 at pci1 dev 7 function 0 "Realtek 8139" rev 0x10: apic 1 int 20, address
00:0a:e4:e7:6b:da
rlphy0 at rl0 phy 0: RTL internal PHY
cbb0 at pci1 dev 9 function 0 "ENE CB-1410 CardBus" rev 0x01: apic 1 int 22,
CardBus support disabled
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int 21,
ICH6 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auich0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST980829A>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PHILIPS, DVD+-RW SDVD8441, PX41> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: apic 1 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL4 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-3200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (3c339ffd90931f05.a) swap on wd0b dump on wd0b
06:09.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
Subsystem: Acer Incorporated [ALI] Device 006a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at b0111000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=00, subordinate=00, sec-latency=32
Memory window 0: fffff000-00000fff (prefetchable)
Memory window 1: fffff000-00000fff (prefetchable)
I/O window 0: 0000fffc-00000003
I/O window 1: 0000fffc-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
--
Tati Chevron
Perl and FORTRAN specialist.
SWABSIT development and migration department.
http://www.swabsit.com
