On 5.12.2015. 16:35, Peter Hessler wrote: > On 2015 Dec 05 (Sat) at 16:16:50 +0100 (+0100), Hrvoje Popovski wrote: > :On 4.12.2015. 17:35, Hrvoje Popovski wrote: > :> On 4.12.2015. 12:47, Mark Kettenis wrote: > :>> Here is a new diff to make ix(4) mpsafe. Should now longer get stuck > :>> in the OACTIVE state. Tests more than welcome. > :>> > :> > :> > :> Hi, > :> > :> i have tested this patch with 82599 and x540 while sending 6Mpps for cca > :> 3 hours and ifconfig down/up and everything is working fine. Will test > :> it more and if I find something will send mail. > :> > :> Thank you. > :> > : > : > :Hi, > : > :sending 12Mpps for about 10 hours and i haven't seen OACTIVE flag and > :with ifconfig down/up couldn't trigger > :ix1: unable to fill any rx descriptors > :ix1: Could not setup receive structures > : > : > > What is the packet rate on the receiving system? Are you testing > routing/forwarding? >
i was trying to trigger OACTIVE flag and "unable to fill any rx descriptors" and i forgot about anything else :) it's only forwarding and receiver side gets around 650kpps, most of the time.. but this number can vary from 300kpps to 1Mpps and i'm not sure what triggers it ....