On Thu, Aug 18, 2016 at 12:49:42PM +0100, Jason McIntyre wrote: > On Wed, Aug 17, 2016 at 11:47:40PM +0200, Remi Locherer wrote: > > Hi > > > > I think there is a small mistake in relayd.conf.5. > > > > Remi > > > > > > Index: relayd.conf.5 > > =================================================================== > > RCS file: /cvs/src/usr.sbin/relayd/relayd.conf.5,v > > retrieving revision 1.170 > > diff -u -p -r1.170 relayd.conf.5 > > --- relayd.conf.5 29 Jul 2016 10:09:27 -0000 1.170 > > +++ relayd.conf.5 17 Aug 2016 21:43:48 -0000 > > @@ -166,7 +166,7 @@ for more information about SNMP configur > > .It Ic timeout Ar number > > Set the global timeout in milliseconds for checks. > > This can be overridden by the timeout value in the table definitions. > > -The default interval is 200 milliseconds and it must not exceed the > > +The default timeout is 200 milliseconds and it must not exceed the > > global interval. > > note the trailing text "must not exceed the global interval". > > relayd people? >
The diff is correct. The timeout depends on the interval. Basically, the check must be completed before the next check interval. OK reyk > jmc > > > Please note that the default value is optimized for checks within the > > same collision domain \(en use a higher timeout, such as 1000 milliseconds, > > > > > --