On 01/25/17 01:32, Martin Pieuchot wrote:
> I just enabled the NET_LOCK() again and I'm looking for test reports.
> Please go build a kernel from sources or wait for the next snapshot,
> run it and report back.
> 
> If you're looking for some small coding tasks related to the NET_LOCK()
> just do:
> 
>       # sysctl kern.splassert=2
>       # sysctl kern.pool_debug=2
>       
> Then watch for the traces on your console.
> 
> You'll see something like:
> 
>       Starting stack trace...
>       yield(0,1,d09dac52,f5549dbc,d94e9378) at yield+0xa4
>       yield(d0bc8f40,1,f5549e18,80,14) at yield+0xa4
>       pool_get(d0bc8f40,1,f5549ec8,d03ecbfb,d97815f4) at pool_get+0x1ba
>       m_get(1,3,f5549ec0,d03a9362,d0bc22e0) at m_get+0x30
>       doaccept(d977e6c4,3,cf7ee4f8,cf7ee4ec,2000) at doaccept+0x193
>       sys_accept(d977e6c4,f5549f5c,f5549f7c,0,f5549fa8) at sys_accept+0x37
>       syscall() at syscall+0x250
>       
> This means accept(2) is doing a memory allocation that can sleep, here
> with m_get(9), while holding the NET_LOCK().  Even if these should be
> ok, it is easy to avoid them.  In the case of doaccept() a mbuf could
> be allocated beforehand or simply use the stack for that.


I updated a nuc w/ amd64 -current (GENERIC.MP) #154 and have more data.  The 
nuc doesn't have a serial port so I extracted[1] dmesg parts from 
/var/log/messages.  Here's a bit of a summary:

>cut -d\  -f4- messages.nuc2.NET_LOCK.01|grep -e 'syscall ' | sort|uniq -c|sort 
>-nr
  32 --- syscall (number 97) ---
  31 --- syscall (number 55) ---
  21 --- syscall (number 54) ---
  13 --- syscall (number 118) ---
   9 --- syscall (number 105) ---

[1]<http://arp.thrush.com/obsd/messages.nuc2.NET_LOCK.01>


######################################################################
OpenBSD 6.0-current (GENERIC.MP) #154: Wed Jan 25 19:50:16 MST 2017
    [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16959188992 (16173MB)
avail mem = 16440545280 (15678MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x9eee3000 (56 entries)
bios0: vendor Intel Corporation version "MYBDWi5v.86A.0033.2016.1124.2006" date 
11/24/2016
bios0: Intel Corporation NUC5i5MYBE
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT UEFI LPIT SSDT ASF! SSDT 
SSDT SSDT DMAR BGRT
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4) 
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) 
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2295.06 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2295060110 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2294.69 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2294.70 MHz
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2294.69 MHz
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimadt0: bogus nmi for apid 0
acpimadt0: bogus nmi for apid 2
acpimadt0: bogus nmi for apid 1
acpimadt0: bogus nmi for apid 3
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus -1 (RP04)
acpiprt8 at acpi0: bus -1 (RP05)
acpiprt9 at acpi0: bus -1 (RP06)
acpiprt10 at acpi0: bus -1 (RP07)
acpiprt11 at acpi0: bus -1 (RP08)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@117 mwait.1@0x30), 
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@117 mwait.1@0x30), 
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@117 mwait.1@0x30), 
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@117 mwait.1@0x30), 
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: FN00, resource for FAN0
acpipwrres12 at acpi0: FN01, resource for FAN1
acpipwrres13 at acpi0: FN02, resource for FAN2
acpipwrres14 at acpi0: FN03, resource for FAN3
acpipwrres15 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 110 degC
acpitz1 at acpi0: critical temperature is 110 degC
"INT3F0D" at acpi0 not configured
"INT3437" at acpi0 not configured
"INT33A1" at acpi0 not configured
dwiic0 at acpi0: I2C0 addr 0xfe103000/0x1000 irq 7
iic0 at dwiic0
dwiic1 at acpi0: I2C1 addr 0xfe105000/0x1000 irq 7
iic1 at dwiic1
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2295 MHz: speeds: 2301, 2300, 2200, 2000, 1900, 1800, 
1700, 1500, 1400, 1300, 1100, 1000, 900, 800, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 2560x1440, 32bpp
error: [drm:pid0:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for DP 
idle patterns
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address 
b8:ae:ed:75:93:eb
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek/0x0283
audio0 at azalia1
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 3: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Corsair Force LE, SAFC> SCSI3 0/direct 
fixed t10.ATA_Corsair_Force_LE_SSD_16308020000105670292
sd0: 457862MB, 512 bytes/sector, 937703088 sectors, thin
sd1 at scsibus1 targ 3 lun 0: <ATA, Samsung SSD 850, EMT2> SCSI3 0/direct fixed 
naa.5002538d40b3afb8
sd1: 238475MB, 512 bytes/sector, 488397168 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18
iic2 at ichiic0
spdmem0 at iic2 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic2 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x4e/2: NCT6776F rev 0x33
lm1 at wbsio0 port 0xa00/8: NCT6776F
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
axe0 at uhub0 port 2 configuration 1 interface 0 "ASIX Electronics USB 2.0 
10/100 Ethernet controller" rev 2.00/0.01 addr 2
axe0: AX88172, address 00:10:60:0a:b4:73
rlphy0 at axe0 phy 3: RTL8201L 10/100 PHY, rev. 1
uhub2 at uhub0 port 3 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" 
rev 2.00/32.98 addr 3
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Generic USB" rev 1.10/1.10 
addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "Generic USB" rev 1.10/1.10 
addr 4
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhub3 at uhub2 port 3 configuration 1 interface 0 "Texas Instruments product 
0x8142" rev 2.00/1.00 addr 5
uhidev2 at uhub3 port 1 configuration 1 interface 0 "Kensington USB/PS2 Wheel 
Mouse" rev 1.10/1.01 addr 6
uhidev2: iclass 3/1
ums1 at uhidev2: 5 buttons, Z dir
wsmouse1 at ums1 mux 0
uhidev3 at uhub3 port 3 configuration 1 interface 0 "Corsair Corsair STRAFE 
Gaming Keyboard" rev 2.00/2.04 addr 7
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev4 at uhub3 port 3 configuration 1 interface 1 "Corsair Corsair STRAFE 
Gaming Keyboard" rev 2.00/2.04 addr 7
uhidev4: iclass 3/0, 14 report ids
ukbd2 at uhidev4 reportid 1: 128 variable keys, 0 key codes
wskbd3 at ukbd2 mux 1
wskbd3: connecting to wsdisplay0
uhid2 at uhidev4 reportid 2: input=4, output=0, feature=0
uhid3 at uhidev4 reportid 3: input=63, output=0, feature=0
uhid4 at uhidev4 reportid 14: input=63, output=0, feature=0
uhidev5 at uhub3 port 3 configuration 1 interface 2 "Corsair Corsair STRAFE 
Gaming Keyboard" rev 2.00/2.04 addr 7
uhidev5: no input interrupt endpoint
uhub4 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 
2.00/0.03 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd1a (df92bb398986da6c.a) swap on sd1b dump on sd1b

Reply via email to