On Mon, Nov 06, 2017 at 01:26:27PM +0100, Remi Locherer wrote: > Hi, > > ospfd.conf(5) should mention what ospfd does automatically when > configured on carp interfaces. > > ok? > > Remi > > > Index: ospfd.conf.5 > =================================================================== > RCS file: /cvs/src/usr.sbin/ospfd/ospfd.conf.5,v > retrieving revision 1.48 > diff -u -p -r1.48 ospfd.conf.5 > --- ospfd.conf.5 11 Mar 2015 08:05:11 -0000 1.48 > +++ ospfd.conf.5 6 Nov 2017 12:11:34 -0000 > @@ -355,9 +355,15 @@ The default value is 10; valid range is > .It Ic metric Ar cost > Set the interface metric a.k.a. cost. > The default value is 10; valid range is 1\-65535. > +A metric of 65535 is used for > +.Xr carp 4 > +interfaces with status backup. > .It Ic passive > Prevent transmission and reception of OSPF packets on this interface. > The specified interface will be announced as a stub network. > +On > +.Xr carp 4 > +interfaces passive mode is enforced.
ok by me. however i think that last sentence would read better as: Passive mode is enforced for .Xr carp 4 interfaces. that matches the structure of your addition above, which puts the epmphasis on the section being described, rather than carp(4) interfaces. up to you. jmc > .It Ic retransmit-interval Ar seconds > Set retransmit interval. > The default value is 5 seconds; valid range is 5\-3600 seconds. >