On Tue, 2021-03-09 at 14:48 +0100, Stefan Sperling wrote:
> This implements a new rate adaptation module for net80211, called
> "RA",
> which resulted from a long discussion and exchanges of various
> diffs
> between Christian Ehrhardt and myself, targeting problems with
> MiRA.
> 
> Tests with any of the various iwn(4) and iwm(4) devices are very
> welcome.

I've only been using it for a few hours, but it is clearly better
than what was in my -CURRENT snapshot from this morning. Measuring
using speedof.me, I got about a 25% increase in download speed and
about a 35% increase in upload speed. There's some uncertainty
because I'm using a crowded 2.4 GHz spectrum and sometimes it's
more congested than at other times. Subjectively, it feels a lot
better when browsing the web, FWIW.

For some reason, iwm has never used the much less congested 5GHz
band that Linux uses on the same machine, resulting in only a
small fraction of the speed I get when I am booted into Linux
(this is not a change caused by your patch). Your patch makes the
connection usable for me. Nice work! :)

--Aaron

=======

$ ifconfig iwm0
iwm0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        lladdr xx:xx:xx:xx:xx:xx
        index 2 priority 4 llprio 3
        groups: wlan egress
        media: IEEE802.11 autoselect (HT-MCS13 mode 11n)
        status: active
        ieee80211: nwid xxxxxxxxx chan 6 bssid xx:xx:xx:xx:xx:xx
53% wpakey wpaprotos wpa2 wpaakms psk wpaciphers ccmp
wpagroupcipher ccmp
        inet 192.168.xx.xxx netmask 0xffffff00 broadcast
192.168.xx.255

OpenBSD 6.9-beta (GENERIC.MP) #0: Wed Mar 10 17:27:36 PST 2021
   
aa...@millipede.iforgotmy.name:/var/git/src/sys/arch/amd64/compile
/GENERIC.MP
real mem = 16827916288 (16048MB)
avail mem = 16302530560 (15547MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (65 entries)
bios0: vendor LENOVO version "N14ET37W (1.15 )" date 09/06/2016
bios0: LENOVO 20BSCTO1WW
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT
SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT TCPA SSDT UEFI
MSDM BATB FPDT UEFI DMAR
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3)
EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.65 MHz, 06-
3d-04
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,D
TES64,MWAIT,DS-
CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE
4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAG
E1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI
1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTR
L,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.24 MHz, 06-
3d-04
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,D
TES64,MWAIT,DS-
CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE
4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAG
E1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI
1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTR
L,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.24 MHz, 06-
3d-04
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,D
TES64,MWAIT,DS-
CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE
4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAG
E1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI
1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTR
L,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.24 MHz, 06-
3d-04
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,D
TES64,MWAIT,DS-
CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE
4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAG
E1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI
1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTR
L,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 3 (EXP1)
acpiprt3 at acpi0: bus 4 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus -1 (EXP6)
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibat0 at acpi0: BAT0 model "45N1707" serial  3244 type LiP oem
"LGC"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
tpm0 at acpi0 TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev
0x4e
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
acpipwrres1 at acpi0: NVP3, resource for PEG_
acpipwrres2 at acpi0: NVP2, resource for PEG_
acpitz0 at acpi0: critical temperature is 128 degC
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2601, 2600, 2500, 2300,
2100, 2000, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800, 600, 500
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev
0x09
drm0 at inteldrm0
inteldrm0: msi, BROADWELL, gen 8
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev
0x09: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03:
msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub"
rev 3.00/1.00 addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not
configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi,
address 54:ee:75:95:22:1d
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev
0x03: msi
azalia1: codecs: Realtek ALC292
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
pci1 at ppb0 bus 3
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 4
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265"
rev 0x99, msi
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03:
apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub"
rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03:
msi, AHCI 1.3
ahci0: port 3: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 3 lun 0: <ATA, SAMSUNG MZNLN256, EMT2>
naa.5002538d00000000
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03:
apic 2 int 18
iic0 at ichiic0
pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev
0x03
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300 0x330040
0xf003a3 0x12e800
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 5 configuration 1 interface 0 "ELAN
Touchscreen" rev 2.00/0.13 addr 2
uhidev0: iclass 3/0, 68 report ids
ums0 at uhidev0 reportid 1: 1 button, tip
wsmouse2 at ums0 mux 0
uhid0 at uhidev0 reportid 2: input=64, output=0, feature=0
uhid1 at uhidev0 reportid 3: input=0, output=31, feature=0
uhid2 at uhidev0 reportid 4: input=19, output=0, feature=0
uhid3 at uhidev0 reportid 10: input=0, output=0, feature=1
ums1 at uhidev0 reportid 68
ums1: mouse has no X report
ugen0 at uhub0 port 6 "Validity Sensors VFS5011 Fingerprint
Reader" rev 1.10/0.78 addr 3
ugen1 at uhub0 port 7 "Intel Bluetooth" rev 2.01/0.01 addr 4
uvideo0 at uhub0 port 8 configuration 1 interface 0
"SC20F26946AA51R030Z Integrated Camera" rev 2.00/0.17 addr 5
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate
Matching Hub" rev 2.00/0.03 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 205540MB, 512 bytes/sector, 420945937 sectors
root on sd1a (bef513b28583f4b8.a) swap on sd1b dump on sd1b
inteldrm0: 2560x1440, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation),
using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x210, fw ver 17.3216344376.0, address
10:02:b5:8c:25:f3


Reply via email to